Compliance API

Upcoming Deprecation

The Do Not Call (DNC) List Management API methods (/compliance/dnc namespace methods) have been deprecated in the Fall 23 release. You should use the Dialtime DNC methods instead. To test the Dialtime DNC methods, contact the LiveVox Customer Care Team to enable them.

Introduction

The Compliance API provides support for features such as Do Not Call List management and access to call recordings.

See the LiveVox API Overview for a general description of how to interact with the API.

Prerequisites

To obtain a valid Session ID, you must have successfully logged into the LiveVox platform. See Generating a Session ID for more information.
To obtain an Access Token that is used in API requests, you must have an active subscription to the Configuration API. See Access Tokens for details.
All messages in this API may be subject to rate limits and other restrictions.

User Roles

Unless otherwise specified in this documentation, for a user to be able to access any data through the Compliance API, the user must belong to the Sysadmin, Superuser, or Manager role. For all "DNC List Management" API methods other than "Is Blocked", users belonging to the Manager role must also have the "Edit DNC Lists" (or "Access to DNC") Optional Power configured. These roles are defined in the LiveVox Configuration Manager and correspond to users who can access LiveVox configuration data through the LiveVox user interfaces.

Within a session generated by an Agent, the following methods of the Compliance API may be accessed. Attempts to access any other API method of the Compliance API will return a 403 Forbidden response.

Read DNC
Create DNC
Is Blocked
List DNC Entries
Get DNC List Info
Find Matching DNC
Zip Area Mismatch

Do Not Call Rules

Do Not Call (DNC) lists are a crucial component for supporting client compliance regulations. A DNC entry effectively prohibits calling. These prohibitions can be defined in a number of ways:

Based on phone number
Based on account number
Based on phone number and account number
Based on zip code

These entries can also be defined as being either permanent or a daily restriction. Daily restrictions are cleared nightly. DNC entries can be associated with a particular Service, or they can be associated with the Client. For the latter type, the DNC entry will apply to all the Services for that Client.

The API does not check the Client-level DNC configuration in order to disallow particular types of DNC entries from being created. For example, a Client may be configured so that only Permanent DNC entries can be created through the DNC Editor in the LiveVox Portal. This configuration exists mainly so that users do not have to see configuration screens that are not relevant to way their business operates. In this example, the API will still support the ability to create Daily DNC entries for this Client. Therefore, it is the responsibility of the API consumer to comply with the requirements of the business.

A major scenario where DNC rules apply is during preview dialing. At that point, an agent may need to determine if a number should be called (see IsBlocked). To clarify the behavior of this, the following example is provided.

The following table provides an example DNC configuration. Blank cells indicate no value is present.

Client ID and DNC Type are not relevant to the following example.

DNC ID	Service ID	Phone Number	Account Number	Zip Code
1	123	4152257000
2	456	6173432000	A12345
3		2016668000	A12345
4		5034441000
5				94110
6			A6789

The IsBlocked requires a Service as input since all dialing is associated with a Service.

IsBlocked Input	Results	Applicable DNC Entries	Notes
phone = 4152257000, service = 123	true	1
phone = 5034441000, service = 123	true	4	The DNC entry for this phone number is not assigned to a particular Service so it applies to every Service for the Client.
phone = 3133335000, service = 123	false	-	This phone number is not present in the DNC configuration.
phone = 6173432000, account = A12345, service = 456	true	2
phone = 4152257000, account = A12345, service = 123	true	1	The DNC entry is not associated with a particular account, so the phone number will be blocked regardless of the account number used in the request.
phone = 7024441000, account = A6789, service = 123	true	6	The DNC entry is not associated with a particular phone number, so the account will be blocked for any phone number used in the request.
phone = 4152257000, account = A12345, service = 456	false	-	There is no DNC entry for this phone number for this particular Service, nor is there one for the Client.
phone = 2016668000, account = A6789, service = 789	false	-	While there is a Client-level DNC entry that contains this phone number (#3), it is associated with a different account number and only applies to that account.
phone = 6173432000, service = 456	false	-	While there is a Client-level DNC entry that contains this phone number (#2), it is associated with an account number and only applies to that account.
account = A12345, service = 456	false	-
zip = 94110, service = 456	true	5

Wildcard Support

It is possible for DNC entries on the LiveVox platform to include wildcards, such as a phone number entry represented as 209*******. Such an entry would instruct the LiveVox platform to block all calls to the (209) area code. This is a "legacy" feature. The proper way to have the LiveVox platform block dialing to entire area codes is to use Dialing Profiles. This instructs the LiveVox dialer to block calls to the area code, at dial-time.

The DNC API method IsBlocked does not support wildcards directly. Here is an example. Let's say that there is a single entry in a Client's Daily DNC list, which is 209*******. If you use the IsBlocked method and pass in the string 2093334545, the response will be false because that entry is not in the DNC list, and the DNC API IsBlocked method does not take wildcards into account. However, if you passed the string 209****** into the IsBlocked method, it would return true.

API Methods

Compliance Check

The Compliance Check methods of the Compliance API provide the ability to perform certain compliance checks in real-time. Currently, there is an IsBlocked method that allows you to determine if a particular phone number, account number, phone + account, or zip code should be blocked based on your DNC Lists; and a ZipAreaMatch method which allows you to determine if an area code and zip code are a match.

Is Blocked

Description: Determines if the provided information is covered by one or more DNC entries. If so, the number is blocked and cannot be called. This will check all applicable DNC lists. See DNC Rules for more information and examples.

In addition to checking the DNC lists, the Is Blocked method will also check the LiveVox ACCOUNT table to check if the Do Not Dial and Do Not Dial Daily flags are set for the Account. The flags may be set by an Agent through their agent desktop.

Method: GET /compliance/complianceCheck/isBlocked?[client={clientId}]&service={serviceId}&phone={phone}[&account={account}&zip={zip}]

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
client	clientId	Integer (ID)	No	Identifies which Client the query pertains to.
service	serviceId	Integer (ID)	Yes	If a Service ID is provided, the DNC entries for this particular Service are checked in addition to the "generic" Client ones.
phone	phone	String	No*	At least one of phone, account, or zip must be present for the request to be valid. See DNC Rules for more information.
account	account	String
zip	zip	String

Body:

None

Response Code: 200 OK

Body:

Key or Attribute	Type	Mandatory?	Description
result	Boolean	Yes	Indicates whether or not the call should be blocked. See DNC Rules for more information.

#Request (JSON)
Get /compliance/complianceCheck/isBlocked?client=93119&service=93126&phone=4155553761&account=QA1619323260000&Zip=94114
Host: localhost.com
Content-Type: application/json
Accept: application/json
   
#Response
200 OK
Content-Type: application/json
 
{
  "result": false
}

CODE

ZipAreaMatch

Description: Checks to see if a zip code and area code match, a match is determined based on the type selected.

Method: POST /compliance/complianceCheck/zipAreaMatch

Parameters:

None

Body(JSON):

Key Type Mandatory? Description

areaCode String Yes The area code to be compared.

type

Enum

Yes

Determines what is classified as a "match", when the zip and area code match a true is returned, otherwise a false is obtained. Possible values and definitions are:

DIAL_TIME : Returns a true if the area code corresponds to the zip code within which it is normally located (e.g. the “917” area code is normally located in New York City).
DIAL_TIME_OPTIMIZED : Returns a true if, as in the 'Dial-time' option, the area code corresponds to the zip code within which it is normally located OR if the area code and zip code for a record DO NOT correspond to each other but fall into the same time zone (i.e. the zip code provided is 30075 (Roswell, GA) but the phone number has a 917 area code (NYC, NY) a true would be returned because they are both in the ET time zone.).

zipCode String Yes The zip code to be compared.

Response Code: 200 OK

Body:

Key or Attribute	Type	Mandatory?	Description
result	boolean	Yes	Returns a `true` if the zip and area code "match", otherwise a `false` is returned.

Zip Code and Area Code Match

#Request (JSON)
POST /compliance/complianceCheck/zipAreaMatchs
Host: localhost.com
Content-Type: application/json
Accept: application/json
 
{
"areaCode": 415,
"zipCode": 94111,
"type": "DIAL_TIME"
}

#Response
200 OK
Content-Type: application/json
 
{"result": true}

CODE

Zip Code and Area Code Don't Match

#Request (JSON)
POST /compliance/complianceCheck/zipAreaMatchs
Host: localhost.com
Content-Type: application/json
Accept: application/json
 
{
"areaCode": 415,
"zipCode": 10010,
"type": "DIAL_TIME"
}

#Response
200 OK
Content-Type: application/json
 
{"result": false}

CODE

Dialing Profiles

The Dialing Profile methods of the Compliance API provide the ability to List, Get List Info, Read, Create, Update, and Delete Dialing Profiles for a Client. Dialing Profiles describe the hours and/or days of the week that it is OK to dial consumers in a particular area code, state, or country.

Create Dialing Policy

Description: Adds a policy to an existing Dialing Profile.

User Roles: Sysadmin, Superuser, or IT User

Method: PUT /compliance/dialingProfiles/{id}/policies

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
id	profileId	Integer (ID)	Yes	The ID of the Dialing Profile to be updated.

Body(JSON):

Key	Type	Mandatory?	Description
dayOfWeek	Enum	Yes	The day of the week the policy will restrict, possible values are: `MONDAY` `TUESDAY` `WEDNESDAY` `THURSDAY` `FRIDAY` `SATURDAY` `SUNDAY` `WEEKDAY` `WEEKEND` `ALL`
doNotDial	Boolean	No	If set to `true` any numbers matching the policy will not be dialed.
doNotLeaveMessage	Boolean	No	if set to `true` any numbers matching the policy will not have messages left.
state	Enum	No*	The state where the policy applies, possible values include any state two-letter abbreviation.
areaCode	String	No*	The area code where the policy applies.
startTime	Time	No	For the region and day(s) defined, if dialing is allowed, contacts will not start before this time. If this is not included in the response, the policy is in effect for the entire day(s) defined in `dayOfWeek`.
endTime	Time	No	For the region and day(s) defined, if dialing is allowed, contacts will not be allowed after this time. If this is not included in the response, the policy is in effect for the entire day(s) defined in `dayOfWeek`.

A state or area code or both must be included in the request.

Response Code: 201 Created

Body:

Key	Type	Mandatory?	Description
id	Integer (ID)	Yes	The ID of the newly created Dialing Policy.

Add a policy to an existing Dialing Profile

#Request (JSON)
PUT /compliance/dialingProfiles/12670/policies
Host: localhost.com
Content-Type: application/json
Accept: application/json
 
{"dayOfWeek":"THURSDAY",
"doNotDial":"false",
"doNotLeaveMessage":"true",
"state":null,
"areaCode":"408",
"startTime":null,
"endTime":null}}

#Response
201 Created
Content-Type: application/json
 
{"id": 234565}

CODE

Create Dialing Profiles

Description: Creates a new Dialing Profile.

User Roles: Sysadmin, Superuser, or IT User

Method: POST /compliance/dialingProfiles

Parameters:

None

Body:

Key Type Mandatory? Description

name String Yes Name of the Dialing Profile that will be created.

description String No Description of the Dialing Profile that will be created.

policy

Array

No

An array of policies will be created under the Dialing Profile.

Key	Type	Mandatory?	Description
dayOfWeek	Enum	Yes	The day of the week the policy will restrict, possible values are: `MONDAY` `TUESDAY` `WEDNESDAY` `THURSDAY` `FRIDAY` `SATURDAY` `SUNDAY` `WEEKDAY` `WEEKEND` `ALL`
doNotDial	Boolean	No	If set to `true` any numbers matching the policy will not be dialed.
doNotLeaveMessage	Boolean	No	if set to `true` any numbers matching the policy will not have messages left.
country	String	No	The name of the country where the policy applies.
state	Enum	No*	The state where the policy applies, possible values include any state two-letter abbreviation.
areaCode	String	No*	The area code where the policy applies.
startTime	Time	No	For the region and day(s) defined, if dialing is allowed, contacts will not start before this time. If this is not included in the response, the policy is in effect for the entire day(s) defined in `dayOfWeek`.
endTime	Time	No	For the region and day(s) defined, if dialing is allowed, contacts will not be allowed after this time. If this is not included in the response, the policy is in effect for the entire day(s) defined in `dayOfWeek`.

A state or area code or both must be included in the request.

Response Code: 201 Created

Body:

Key	Type	Mandatory?	Description
id	Integer (ID)	Yes	The ID of the newly created Dialing Profile.

Create a new Dialing Profile

#Request (JSON)
POST /compliance/dialingProfiles
Host: localhost.com
Content-Type: application/json
Accept: application/json
 
{
   "name": "For Documentation",
   "description": "used for documentation",
   "policy":    [
            {
         "dayOfWeek": "WEEKDAY",
         "doNotDial": "false",
         "doNotLeaveMessage": "true",
         "country": null,
         "state": "KS",
         "areaCode": null,
         "startTime": null,
         "endTime": null
      },
            {
         "dayOfWeek": "ALL",
         "doNotDial": "true",
         "doNotLeaveMessage": "true",
         "country": null,
         "state": null,
         "areaCode": "410",
         "startTime": null,
         "endTime": null
      },
            {
         "dayOfWeek": "MONDAY",
         "doNotDial": "false",
         "doNotLeaveMessage": "false",
         "country": null,
         "state": "CA",
         "areaCode": "415",
         "startTime": "1391184000",
         "endTime": "1391234400"
      }
   ]
}
 
#Response (JSON)
201 Created
Content-Type: application/json
 
{"id": 12670}

CODE

Request to create a new Dialing Policy with state and area code mismatch

#Request (JSON)
POST /compliance/dialingProfiles
Host: localhost.com
Content-Type: application/json
Accept: application/json
 
{
   "name": "For Documentation",
   "description": "used for documentation",
   "policy":    [
            {
         "dayOfWeek": "WEEKDAY",
         "doNotDial": "false",
         "doNotLeaveMessage": "true",
         "country": null,
         "state": "KS",
         "areaCode": 415,
         "startTime": null,
         "endTime": null
      }
   ]
}
 
#Response (JSON)
400 Bad Request
Content-Type: application/json
 
{
   "errorCode": 202,
   "errorMessage": "Area code/state mismatch"
}

CODE

Delete Dialing Policy

Description: Removes an existing policy from a Dialing Profile.

User Roles: Sysadmin, Superuser, or IT User

Method: DELETE /compliance/dialingProfiles/{id}/policies/{policy}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
id	profileId	Integer (ID)	Yes	The ID of the Dialing Profile to be updated.
policy	policyId	Integer (ID)	Yes	The ID of the policy to be removed.

Body:

None

Response Code: 204 No Content

Body:

None

Remove an existing policy from a Dialing Profile

#Request (JSON)
DELETE /compliance/dialingProfiles/12670/policies/36922
Host: localhost.com
Content-Type: application/json
Accept: application/json
 
#Response
204 No Content

CODE

Delete Dialing Profiles

Description: Deletes an existing Dialing Profile.

User Roles: Sysadmin, Superuser, or IT User

Method: DELETE /compliance/dialingProfiles/{id}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
id	profileId	Integer (ID)	Yes	The ID of the Dialing Profile to be deleted.

Body:

None

Response Code: 204 No Content

Body:

None

Delete an existing Dialing Profile

#Request
DELETE /compliance/dialingProfiles/12612
Host: localhost.com
Content-Type: application/json
Accept: application/json  

#Response
204 No Content

CODE

Attempt to delete a Dialing Profile that does not exist

#Request
DELETE /compliance/dialingProfiles/12612
Host: localhost.com
Content-Type: application/json
Accept: application/json  

#Response
404 Not Found

CODE

Get Dialing Profile List Info

Description: Gets metadata concerning a list of Dialing Profiles for a Client. Any system-wide Dialing Profiles that are available for all Clients will also be considered.

User Roles: Sysadmin, Superuser, or IT User

Method: GET /compliance/dialingProfiles/info[?client={clientId}]

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
client	clientId	Integer (ID)	No	Identifies which Client the list pertains to

Body:

None

Response Code: 200 OK

Body:

Key or Attribute	Type	Mandatory?	Description
size	Integer	Yes	Total number of entries in the list
lastModified	DateTime	No	The last date & time that the list was updated. This information might not be available. This is formatted according to the definition of dateTime in the XML Schema specification. For JSON responses, it is represented as the number of milliseconds since midnight on January 1, 1970 (GMT).

Get the metadata for the list of Dialing Profiles configured for a client.

#Request (JSON)
GET /compliance/dialingProfiles/info/client=12345
Host: localhost.com 
Content-Type: application/json
Accept: application/json  

#Response (JSON)
200 OK
Content-Type: application/json

{
   "size": 7,
   "lastModified": 1372182992000
}

CODE

List Dialing Profiles

Description: Lists Dialing Profiles configured for a Client. Any system-wide Dialing Profiles that are available for all Clients will also be listed.

User Roles: Sysadmin, Superuser, or IT User

Method: GET /compliance/dialingProfiles?[client={clientId}&]count={n}&offset={n}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
client	clientId	Integer (ID)	No	Identifies which Client the list pertains to
count	n	Integer	Yes	Specifies the number of items to return in the list. There is a hard cap of 1000 items.
offset	n	Integer	Yes	Required for pagination. Specifies the offset from 0, based on the count, to start listing from.

Body:

None

Response Code: 200 OK

Body:

Key

Type

Mandatory?

Description

dialingProfile

Array

No

A container for a page of Dialing Profile entries. The page size is controlled via count and offset in the request.

Key	Type	Mandatory	Description
id	Integer (ID)	Yes	Internal LiveVox ID of the Dialing Profile.
name	String	Yes	Display name of the Dialing Profile.
description	String	No	Description of the Dialing Profile.

No

A URI for the next page of entries. If next is not present, or blank, then there are no pages after this one.

Get the list of Dialing Profiles configured for a Client.

#Request (JSON)
GET /compliance/dialingProfiles?count=10&client=4199&offset=0
Host: localhost.com 
Content-Type: application/json
Accept: application/json  

#Response (JSON)
200 OK
Content-Type: application/json

{
	"dialingProfile":    [
            {
         "id": 321,
         "name": "LV_Standard_SDR_A",
         "description": "Standard US State Dialing Restrictions, restricts TX, NV, PA."
      },  
            {
         "id": 5589,
         "name": "77",
         "description": null
      },
            {
         "id": 7850,
         "name": "Canada",
         "description": null
      },
            {
         "id": 10592,
         "name": "QA_TEST",
         "description": null
      },
            {
         "id": 4413,
         "name": "Test",
         "description": null
      },
            {
         "id": 2441,
         "name": "Updated Restrictions",
         "description": "Based on recent analysis"
      }
   ],
   "next": null
}

CODE

Read Dialing Profile

Description: Gets information about a Dialing Profile resource.

User Roles: Sysadmin, Superuser, or IT User

Method: GET /compliance/dialingProfiles/{id}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
id	profileId	Integer (ID)	Yes	The ID of the Dialing Profile resource to read. You can read any Dialing Profile configured for the Client, as well as any system-wide Dialing Profiles available to all Clients.

Body:

None

Response Code: 200 OK

Body:

Key Type Mandatory? Description

clientId Integer (ID) No The Client the Dialing Profile belongs to. If not included in the response, it means the Dialing Profile is a system-wide one that is available to all Clients.

name String Yes Display name of the Dialing Profile.

description String Yes Description of the Dialing Profile. Could be null.

clientDefault Boolean Yes If true, indicates that this Dialing Profile is configured as the default Dialing Profile for the Client.

service

Array

Yes

An array of zero or more Services to which the Dialing Profile is assigned as the default.

Key	Type	Mandatory?	Description
id	Integer (ID)	Yes	The LiveVox ID of the Service

policy

Array

Yes

An array of zero or more policies that are configured for a Dialing Profile.

Key	Type	Mandatory?	Description
dayofWeek	Enum	Yes	The day(s) of the week when this policy is in effect. Possible values are: `MONDAY` `TUESDAY` `WEDNESDAY` `THURSDAY` `FRIDAY` `SATURDAY` `SUNDAY` `WEEKDAY` `WEEKEND` `ALL`
doNotDial	Boolean	Yes	If set to `true`, for the region and day(s) defined, contacts will not be attempted.
doNotLeaveMessage	Boolean	Yes	If set to `true`, for the region and day(s) defined, if dialing is allowed, messages will not be left.
country	String	No	The name of the country where the policy applies.
state	String	No	The two-letter code for the state where the policy applies. If this is not included in the response, then the policy is in effect for the entire country specified in the `country` parameter.
areaCode	String	No	The area code for which the policy applies. If this is not included in the response, then the policy is in effect for all area codes of the state specified in the `state` parameter.
startTime	Time	No	For the region and day(s) defined, if dialing is allowed, contacts will not start before this time. If this is not included in the response, the policy is in effect for the entire day(s) defined in `dayOfWeek`.
endTime	Time	No	For the region and day(s) defined, if dialing is allowed, contacts will not be allowed after this time. If this is not included in the response, the policy is in effect for the entire day(s) defined in `dayOfWeek`.

Read the details of a Dialing Profile

#Request (JSON)
GET /compliance/dialingProfiles/7850
Host: localhost.com 
Content-Type: application/json
Accept: application/json  

#Response (JSON)
200 OK
Content-Type: application/json

{
   "service":    [
      {"id": 38184},
      {"id": 42251},
      {"id": 35578},
      {"id": 35576},
      {"id": 35577}
   ],
   "policy":    [
            {
         "dayOfWeek": "MONDAY",
         "doNotDial": false,
         "doNotLeaveMessage": true,
         "country": "CANADA",
         "state": "NU",
         "areaCode": null,
         "startTime": null,
         "endTime": null
      },
            {
         "dayOfWeek": "TUESDAY",
         "doNotDial": false,
         "doNotLeaveMessage": true,
         "country": "CANADA",
         "state": "NT",
         "areaCode": null,
         "startTime": null,
         "endTime": null
      },
...
            {
         "dayOfWeek": "MONDAY",
         "doNotDial": false,
         "doNotLeaveMessage": true,
         "country": "CANADA",
         "state": "SK",
         "areaCode": "306",
         "startTime": 50400000,
         "endTime": 93600000
      }
   ],
   "clientId": 4199,
   "name": "Canada",
   "description": null,
   "clientDefault": false
}

CODE

Update Dialing Policy

Description: Updates an existing policy of a Dialing Profile.

User Roles: Sysadmin, Superuser, or IT User

Method: PUT /compliance/dialingProfiles/{id}/policies/{policy}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
id	profileId	Integer (ID)	Yes	The ID of the Dialing Profile to be updated.
policy	policyId	Integer (ID)	Yes	The ID of the policy to be updated.

Body(JSON):

Key	Type	Mandatory?	Description
dayOfWeek	Enum	No	The day of the week the policy will restrict, possible values are: `MONDAY` `TUESDAY` `WEDNESDAY` `THURSDAY` `FRIDAY` `SATURDAY` `SUNDAY` `WEEKDAY` `WEEKEND` `ALL`
doNotDial	Boolean	No	If set to `true` any numbers matching the policy will not be dialed.
doNotLeaveMessage	Boolean	No	if set to `true` any numbers matching the policy will not have messages left.
state	Enum	No	The state where the policy applies, possible values include any state two-letter abbreviation.
areaCode	String	No	The area code where the policy applies.
startTime	Time	No	For the region and day(s) defined, if dialing is allowed, contacts will not start before this time. If this is not included in the response, the policy is in effect for the entire day(s) defined in `dayOfWeek`.
endTime	Time	No	For the region and day(s) defined, if dialing is allowed, contacts will not be allowed after this time. If this is not included in the response, the policy is in effect for the entire day(s) defined in `dayOfWeek`.
clearAreaCode	Boolean	No	Removes any defined `areaCode` so the policy applies to the entire state.
clearTimeRange	Boolean	No	Removes any defined `startTime` and `endTime` so the policy applies to the entire day.

Response Code: 204 No Content

Body:

None

Update an existing policy of a Dialing Profile

#Request (JSON)
PUT /compliance/dialingProfiles/12670/policies/36922
Host: localhost.com
Content-Type: application/json
Accept: application/json
 
{"dayOfWeek":null,
"doNotDial":null,
"doNotLeaveMessage":null,
"state":null,
"areaCode":"408",
"startTime":null,
"endTime":null,
"clearAreaCode":null,
"clearTimeRange":null}}
 
#Response
204 No Content

CODE

Update Dialing Profile

Description: Updates the name and description of a Dialing Profile.

User Roles: Sysadmin, Superuser, or IT User

Method: PUT /compliance/dialingProfiles/{id}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
id	profileId	Integer (ID)	Yes	The ID of the Dialing Profile to be updated.

Body(JSON):

Key	Type	Mandatory?	Description
name	String	No	The new name of the Dialing Profile.
description	String	No	The new description of the Dialing Profile.

Response Code: 204 No Content

Body:

None

Update an existing Dialing Profile

#Request (JSON)
PUT /compliance/dialingProfiles/12670
Host: localhost.com
Content-Type: application/json
Accept: application/json
 
{"name":"Docs","description":"testing"}
 
#Response
204 No Content

CODE

Update Dialing Profile Add Service

Description: Adds a Service to an existing Dialing Profile.

User Roles: Sysadmin, Superuser, or IT User

Method: PUT /compliance/dialingProfiles/{id}/services/{service}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
id	profileId	Integer (ID)	Yes	The ID of the Dialing Profile to be updated.
service	serviceId	Integer (ID)	Yes	The ID of the Service to be added to the Dialing Profile.

Body:

None

Response Code: 204 No Content

Body:

None

Add a Skill to a Dialing Profile

#Request (JSON)
PUT /compliance/dialingProfiles/12670/services/40789
Host: localhost.com
Content-Type: application/json
Accept: application/json

#Response
204 No Content

CODE

Update Dialing Profile Remove Service

Description: Removes a Service from an existing Dialing Profile.

User Roles: Sysadmin, Superuser, or IT User

Method: DELETE /compliance/dialingProfiles/{id}/services/{service}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
id	profileId	Integer (ID)	Yes	The ID of the Dialing Profile to be updated.
service	serviceId	Integer (ID)	Yes	The ID of the Service to be removed.

Body:

None

Response Code: 204 No Content

Body:

None

Remove a Skill from a Dialing Profile

#Request (JSON)
DELETE /compliance/dialingProfiles/12670/services/40789
Host: localhost.com
Content-Type: application/json
Accept: application/json
 
#Response
204 No Content

CODE

Dialtime DNC

Currently the Compliance API supports Create, Create Multiple, Delete, Find Matching, List, Read, Update, and Get Dialtime DNC List Info methods for managing the Dialtime DNC settings.

The Phone DNC Type setting in config will determine which DNC methods you'll be allowed to use; if you use the wrong ones the API will return a 400 Bad Request error stating that you are not configured to use the particular method. If the Phone DNC Type setting is set to "Legacy DNC" you'll be able to use any method under the DNC category in the documentation, if you have it set to "Dial-Time Phone DNC" you'll only be able to use the methods under the Dialtime DNC category. By using the Is Legacy DNC Enabled method you can check what your Phone DNC Type is set to and make sure you're using the right methods.

Changing this setting will affect the DNC list your site checks for dialing, we don't recommend changing this setting just to test the APIs.

Create Dialtime DNC

Description: Creates a Dialtime DNC entry.

Method: POST /compliance/dialtime/dnc

Parameters:

None

Body:

Key	Type	Mandatory?	Description
phone	String	Yes	The phone number to create the Dialtime DNC entry for.
contactGroupId	Integer (ID)	No	The contact group to be assigned to the DNC entry.
expirationDate	dateTime	No	The expiration date of the Dialtime DNC entry.

Response Code: 201 Created

Body:

Key	Type	Mandatory?	Description
id	Integer (ID)	Yes	The ID for the created dialtime entry.

Create a DNC phone entry for the client at dial time

#Request (JSON)
POST /compliance/dialtime/dnc
Host: localhost.com
Content-Type: application/json
Accept: application/json

{
   "phone": "4085553745",
   "expirationDate": "1520035349000"
}

#Response (JSON)
201 Created
Content-Type: application/json

{"id":21945272}

CODE

Create Multiple Dialtime DNC

Description: Creates multiplie dialtime DNC entries in a single request.

If any invalid records are included in the request, then 202 error will be returned and the invalid records will be listed in the response; any record which is not listed in the response will be processed successfully.

Method: POST /compliance/dialtime/dnc/bulk

Parameters:

None

Body:

Key

Type

Mandatory?

Description

dncEntries

Array

Yes

An array of Dialtime DNC entries to create/update.

Key	Type	Mandatory?	Description
phone	String	Yes	The phone number to create the Dialtime DNC entry for.
contactGroupId	Integer (ID)	No	The contact group to be assigned to the DNC entry.
expirationDate	dateTime	No	The expiration date of the Dialtime DNC entry.

Response Code: 200 OK

Body:

Key	Type	Mandatory?	Description
processedCount	Integer	Yes	Number of records processed

Create Multiple Dialtime DNC Entries

#Request (JSON)
POST /compliance/dialtime/dnc/bulk
Host: localhost.com
Content-Type: application/json
Accept: application/json

{
  "dncEntries": [
    {
      "phone": "4155553734",
      "contactGroupId": "1320"
    },
    {
      "phone": "4155553767",
      "contactGroupId": "1320",
      "expirationDate": "1519957965000"
    }
  ]
}

#Response (JSON)
200 OK
Content-Type: application/json

{"processedCount": 2}

CODE

Create Multiple Dialtime DNC Entries With Invalid Contact Group

#Request (JSON)
POST /compliance/dialtime/dnc/bulk
Host: localhost.com
Content-Type: application/json
Accept: application/json
  
{
  "dncEntries": [
    {
      "phone": "6503517497",
      "contactGroupId": 4962,
      "expirationDate": "2021-04-20T14:24:47.847Z"
    },
    {
      "phone": "6503517485",
      "contactGroupId": 4967
    },
    {
      "phone": "6505153873",
      "contactGroupId": 4968,
      "expirationDate": "2021-04-24T18:36:23.399Z"
    }
  ]
}
  
#Response (JSON)
400 Bad Request
Content-Type: application/json
  
{
  "code": 202,
  "message": "Record 3: , Contact Group is not valid.  Processed DNC filename: O29y5wrP totally in 1 batches, no of lines processed: 3."
}

CODE

Delete Dialtime DNC

Description: Deletes a Dialtime DNC entry.

Method: DELETE /compliance/dialtime/dnc/{dncId}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
dncId	dncId	Integer	Yes	Specifies the dialtime DNC entry id to be deleted.

Body:

None

Response Code: 204 No Content

Body:

None

Delete an Existing Dialtime DNC Entry

#Request
DELETE /compliance/dialtime/dnc/21945272
Host: localhost.com
Content-Type: application/json
Accept: application/json  

#Response
204 No Content

CODE

Find Matching Dialtime DNC

Description: Finds a matching Dialtime DNC entry.

Method: POST /compliance/dialtime/dnc/search?offset={n}&count={n}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
count	n	Integer	Yes	Specifies the number of items to return in the list. There is a hard cap of 1000 items.
offset	n	Integer	Yes	Specifies the offset from 0, based on the count, to start listing from.

Body:

Key

Type

Mandatory?

Description

filter

Object

Yes

DNC entries to create with the following structure

Key	Type	Mandatory?	Description
phone	String	No	The phone number to search the Dialtime DNC for.
contactGroupId	Integer (ID)	No	The Contact Group ID to search

Response Code: 200 OK

Body:

Key

Type

Mandatory?

Description

dncEntries

Array

Yes

An array of Dialtime DNC entries that match the filter criteria in the request.

Key	Type	Mandatory?	Description
id	Integer (ID)	Yes	The ID for the entry.
phone	String	Yes	The phone number of the Dialtime DNC entry.
contactGroupId	Integer (ID)	No	The Contact Group ID of the Dialtime DNC entry.
expirationDate	dateTime	No	The expiration date of the Dialtime DNC entry.

Find Matching Dialtime DNC entries

#Request (JSON)
GET /compliance/dialtime/dnc/search?offset=0&count=10
Host: localhost.com 
Content-Type: application/json
Accept: application/json  

{
   "phone": "4155553734"
}

#Response
200 OK
Content-Type: application/json
{
  "dncEntries": [
    {
      "phone": "4155553734",
      "contactGroupId": 1320,
      "id": 21945273
    },
    {
      "phone": "4155553734",
      "contactGroupId": 1321,
      "id": 21945275
    }
  ]
}

CODE

Get Dialtime DNC List Info

Description: Gets metadata for a list of Dialtime DNC entries.

Method: GET /compliance/dialtime/dnc/info

Parameters:

None

Body:

None

Response Code: 200 OK

Body:

Key	Type	Mandatory?	Description
size	Integer	Yes	The number of Dialtime DNC entries currently loaded for that Client.

Get the metadata for a list of Dialtime DNC Entries

#Request (JSON)
GET /compliance/dialtime/dnc/info
Host: localhost.com 
Content-Type: application/json
Accept: application/json  

#Response (JSON)
200 OK
Content-Type: application/json

{"size": 6}

CODE

List Dialtime DNC

Description: Lists Dialtime DNC entries.

Method: GET /compliance/dialtime/dnc?count={n}&offset={n}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
count	n	Integer	Yes	Specifies the number of items to return in the list. There is a hard cap on 1000 items.
offset	n	Integer	Yes	Required for pagination. Specifies the offset from 0, based on the count parameter, to start listing from.

Body:

None

Response Code: 200 OK

Body:

Key

Type

Mandatory?

Description

Yes

A URI for the next page of entries. If next is not present, or blank, then there are no pages after this one.

dncEntries

Array

Yes

A container for a page of Dialtime DNC entries. The page size is controlled via count and offset in the request.

Key	Type	Mandatory?	Description
id	Integer (ID)	Yes	The ID for the entry.
phone	String	Yes	The phone number of the Dialtime DNC entry.
contactGroupId	Integer (ID)	No	The Contact Group ID of the Dialtime entries.
expirationDate	dateTime	No	The expiration date of the Dialtime DNC entry.

Get a List of Dialtime DNC Entries

#Request (JSON)
GET /compliance/dialtime/dnc?count=10&offset=0
Host: localhost.com 
Content-Type: application/json
Accept: application/json  

#Response
200 OK
Content-Type: application/json

{"dncEntries": [
      {
      "phone": "4155553734",
      "contactGroupId": 1320,
      "id": 21945273
   },
      {
      "phone": "4155553767",
      "contactGroupId": 1320,
      "expirationDate": 1519880400000,
      "id": 21945274
   },
...
      {
      "phone": "4085553745",
      "expirationDate": 1519966800000,
      "id": 21945272
   },
      {
      "phone": "8001234567",
      "id": 12225072
   }
]}

CODE

Read Dialtime DNC

Description: Gets information about a Dialtime DNC entry.

Method: GET /compliance/dialtime/dnc/{dncId}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
dncId	dncId	Integer (ID)	Yes	Specifies the DNC entry ID to be read.

Body:

None

Response Code: 200 OK

Response Body:

Key	Type	Mandatory?	Description
id	Integer (ID)	Yes	The ID of the Dialtime DNC entry.
phone	String	Yes	The phone number of the Dialtime DNC entry.
contactGroupId	Integer (ID)	No	The Contact Group ID for the Dialtime
expirationDate	dateTime	No	The expiration date of the Dialtime DNC entry.

Read a Dialtime DNC Entry

#Request (JSON)
GET /compliance/dialtime/dnc/21945274
Host: localhost.com 
Content-Type: application/json
Accept: application/json   

#Response
200 OK
Content-Type: application/json

{
   "phone": "4155553767",
   "contactGroupId": 1320,
   "expirationDate": 1519880400000,
   "id": 21945274
}

CODE

Attempt to read a Dialtime DNC Entry That Doesn't Exist

#Request
GET /compliance/dialtime/dnc/2234
Host: localhost.com 
Content-Type: application/json
Accept: application/json  

#Response
404 Not Found

 
{
   "code": 203,
   "message": "DNC entry not found"
}

CODE

Update Dialtime DNC

Description: Updates a Dialtime DNC entry.

Method: PUT /compliance/dialtime/dnc/{dncId}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
dncId	dncId	Integer (ID)	Yes	Specifies the Dialtime DNC entry to update.

Body:

Key	Type	Mandatory?	Description
phone	String	Yes	The phone number of the Dialtime DNC entry to update.
contactGroupId	Integer (ID)	No	The new Contact Group to be assigned to the Dialtime DNC entry.
expirationDate	dateTime	No	The new expiration date of the Dialtime DNC entry.

Response Code: 204 No Content

Body:

None

Update an Existing Dialtime DNC Entry

#Request (JSON)
PUT /compliance/dialtime/dnc/21945274 
Host: localhost.com 
Content-Type: application/json
Accept: application/json     

{
  "phone": "4155553767",
  "contactGroupId": "1522"
}

#Response
204 No Content
Content-Type: application/json

CODE

Email DNC

The Compliance API supports the Create, Create Multiple, Delete, Search, List, Read, Update, and Get Email DNC List Info methods for managing the Email DNC settings.

The Phone DNC Type setting in the LiveVox Portal (Configure > Services > Client > Settings tab) determines which DNC methods you can use. If you use the wrong DNC methods, the API returns a 400 Bad Request error stating that you are not configured to use that particular method. If the Phone DNC Type is set to Legacy DNC, you can use any method under the DNC category in the documentation. If you have the Phone DNC Type set to Dial-Time Phone DNC, you can only use the methods under the Dialtime/SMS/Email DNC category. By using the Is Legacy DNC Enabled method, you can check your Phone DNC Type and ensure that you are using the correct methods.

Changing this setting affects the DNC list that your site uses for dialing, do not change this setting just to test the APIs.
The "expirationDate" in requests can be in either yyyy-MM-dd format (for example, 2021-03-01) or epoch time in milliseconds (for example, 1616089284000). The "expirationDate" in a response is always in epoch time in milliseconds (for example, 1616089284000).

Create Email DNC

Description: Creates an Email DNC entry.

Method: POST /compliance/email/dnc

Parameters:

None

Body:

Key	Type	Mandatory?	Description
email	String	Yes	The email address for which you are creating the Email DNC entry.
contactGroupId	Integer (ID)	No	The contact group that is assigned to the Email DNC entry.
expirationDate	dateTime	No	The expiration date of the Email DNC entry.

Response Code: 201 Created

Body:

Key	Type	Mandatory?	Description
id	Integer (ID)	Yes	The ID for the created email entry.

Create a dnc email entry

#Request (JSON)
POST /compliance/dialtime/dnc
Host: localhost.com
Content-Type: application/json
Accept: application/json

{
  "email": "example@gmail.com",
  "contactGroupId": "11435",
  "expirationDate": "2021-10-10"
}

#Response (JSON)
201 Created
Content-Type: application/json

{
  "id": 1033288
}

CODE

Create Multiple Email DNC

Description: Creates multiple Email DNC entries in a single request.

Method: POST /compliance/email/dnc/bulk

Parameters:

None

Body:

Key

Type

Mandatory?

Description

dncEntries

Array

Yes

An array of Email DNC entries to create

Key	Type	Mandatory?	Description
email	String	Yes	The email address for which you are creating the Email DNC entry.
contactGroupId	Integer (ID)	No	The contact group that is assigned to the Email DNC entry.
expirationDate	dateTime	No	The expiration date of the Dialtime DNC entry.

Response Code: 200 OK

Body:

Key	Type	Mandatory?	Description
processedCount	Integer	Yes	Number of records processed.

Create Multiple DNC Entries

#Request (JSON)
POST /compliance/email/dnc/bulk
Host: localhost.com
Content-Type: application/json
Accept: application/json

{
  "dncEntries": [
    {
      "email": "example1a@gmail.com",
      "contactGroupId": "1020229",
      "expirationDate": "2021-10-19"
    },
    {
      "email": "example2@gmail.com",
      "contactGroupId": "1020230",
      "expirationDate": "2021-10-20"
    },
    {
      "email": "example3@gmail.com",
      "contactGroupId": "1020231",
      "expirationDate": "2021-10-22"
    }
  ]
}

#Response (JSON)
200 OK
Content-Type: application/json

{
  "processedCount": 3
}

CODE

Delete Email DNC

Description: Deletes an Email DNC entry.

Method: DELETE /compliance/email/dnc/{dncId}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
dncId	dncId	Integer	Yes	Specifies the Email DNC entry ID to be deleted.

Body:

None

Response Code: 204 No Content

Body:

None

Delete an Existing DNC Entry

#Request
DELETE /compliance/email/dnc/21945272
Host: localhost.com
Content-Type: application/json
Accept: application/json

#Response
204 No Content

CODE

Find Matching Email DNC

Description: Finds matching Email DNC entries

Method: POST /compliance/email/dnc/search?offset={n}&count={n}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
count	n	Integer	Yes	Specify the number of items to return in the list. There is a limit of 1000 items.
offset	n	Integer	Yes	Specifies the offset from 0, based on the count, from which to start listing.

Body:

Key

Type

Mandatory?

Description

filter

Object

Yes

DNC entries to create with the following structure

Key	Type	Mandatory?	Description
email	String	No	The email address to search for the Email DNC entry.
contactGroupId	Integer (ID)	No	The contact group ID to search.

Response Code: 200 OK

Body:

Key

Type

Mandatory?

Description

dncEntries

Array

Yes

An array of Email DNC entries that match the filter criteria in the request.

Key	Type	Mandatory?	Description
id	Integer (ID)	Yes	The ID for the entry.
email	String	Yes	The email address of the Email DNC entry.
contactGroupId	Integer (ID)	No	The contact group ID of the Email DNC entry.
expirationDate	dateTime	No	The expiration date of the Email DNC entry.

Find Matching DNC entries

#Request (JSON)
POST /compliance/email/dnc/search?offset=0&count=4
Host: localhost.com 
Content-Type: application/json
Accept: application/json    

{
  "filter": {
    "email": "example1@gmail.com"
  }
}

#Response
200 OK
Content-Type: application/json

{
  "next": "compliance/email/dnc/search?offset=4&count=4",
  "dncEntries": [
    {
      "email": "example1@gmail.com",
      "contactGroupId": 1020229,
      "expirationDate": 1634616000000,
      "dncId": 100630223
    },
    {
      "email": "example1@gmail.com",
      "contactGroupId": 1020230,
      "expirationDate": 1634702400000,
      "dncId": 100630224
    },
    {
      "email": "example1@gmail.com",
      "contactGroupId": 1020231,
      "expirationDate": 1634875200000,
      "dncId": 100630225
    },
    {
      "email": "example1@gmail.com",
      "expirationDate": 1634875200000,
      "dncId": 100630226
    }
  ]
}

CODE

Get Email DNC List Info

Description: Retrieves metadata for a list of Email DNC entries.

Method: GET /compliance/email/dnc/info

Parameters:

None

Body:

None

Response Code: 200 OK

Body:

Key	Type	Mandatory?	Description
size	Integer	Yes	The number of Email DNC entries currently loaded for that client.

Get the metadata for a list of DNC Entries

#Request (JSON)
GET /compliance/email/dnc/info
Host: localhost.com 
Content-Type: application/json
Accept: application/json    

#Response (JSON)
200 OK
Content-Type: application/json

{
  "size": 7
}

CODE

List Email DNC

Description: Lists Email DNC entries.

Method: GET /compliance/email/dnc?count={n}&offset={n}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
count	n	Integer	Yes	Specifies the number of items to return in the list. There is a limit of 1000 items.
offset	n	Integer	Yes	Required for pagination. Specifies the offset from 0, based on the count parameter, from which to start listing.

Body:

None

Response Code: 200 OK

Body:

Key

Type

Mandatory?

Description

Yes

A URI for the next page of entries. If next is not present, or blank, then there are no pages after this one.

dncEntries

Array

Yes

A container for a page of Email DNC entries. The page size is controlled via count and offset in the request.

Key	Type	Mandatory?	Description
id	Integer (ID)	Yes	The ID for the entry.
email	String	Yes	The email address of the Email DNC entry.
contactGroupId	Integer (ID)	No	The Contact Group ID of the Email entry.
expirationDate	dateTime	No	The expiration date of the Email DNC entry.

Get a List of DNC Entries

#Request (JSON)
GET /compliance/email/dnc?offset=0&count=5
Host: localhost.com  
Content-Type: application/json
Accept: application/json   

#Response
200 OK
Content-Type: application/json

{
  "next": "compliance/email/dnc?offset=5&count=5",
  "dncEntries": [
    {
      "email": "example1a@gmail.com",
      "contactGroupId": 1020229,
      "expirationDate": 1634616000000,
      "dncId": 100630220
    },
    {
      "email": "example2@gmail.com",
      "contactGroupId": 1020230,
      "expirationDate": 1634702400000,
      "dncId": 100630221
    },
    {
      "email": "example3@gmail.com",
      "contactGroupId": 1020231,
      "expirationDate": 1634875200000,
      "dncId": 100630222
    },
    {
      "email": "example1@gmail.com",
      "contactGroupId": 1020229,
      "expirationDate": 1634616000000,
      "dncId": 100630223
    },
    {
      "email": "example1@gmail.com",
      "contactGroupId": 1020230,
      "expirationDate": 1634702400000,
      "dncId": 100630224
    }
  ]
}

CODE

Read Email DNC

Description: Reads the Email DNC entries.

Method: GET /compliance/email/dnc/{dncId}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
dncId	dncId	Integer (ID)	Yes	Specifies the DNC entry ID to be read.

Body:

None

Response Code: 200 OK

Response Body:

Key	Type	Mandatory?	Description
id	Integer (ID)	Yes	The ID of the Email DNC entry.
email	String	Yes	The email address of the Email DNC entry.
contactGroupId	Integer (ID)	No	The contact group ID for the Email DNC entry
expirationDate	dateTime	No	The expiration date of the Email DNC entry.

Read a DNC Entry

#Request (JSON)
GET /compliance/email/dnc/100630224
Host: localhost.com  
Content-Type: application/json
Accept: application/json    

#Response
200 OK
Content-Type: application/json

{
  "email": "example1@gmail.com",
  "contactGroupId": 1020230,
  "expirationDate": 1634702400000,
  "dncId": 100630224
}

CODE

Update Email DNC

Description: Updates an Email DNC entry.

Method: PUT /compliance/email/dnc/{dncId}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
dncId	dncId	Integer (ID)	Yes	Specifies the Email DNC entry to update.

Body:

Key	Type	Mandatory?	Description
email	String	Yes	The email address of the Email DNC entry to update.
contactGroupId	Integer (ID)	No	The new contact group assigned to the Email DNC entry.
expirationDate	dateTime	No	The new expiration date of the Email DNC entry.

Response Code: 204 No Content

Body:

None

Update an Existing DNC Entry

#Request (JSON)
PUT /compliance/email/dnc/100630224
Host: localhost.com  
Content-Type: application/json
Accept: application/json    

{
  "email": "example1@gmail.com",
  "contactGroupId": 1020230,
  "expirationDate": "2021-10-25"
}

#Response
204 No Content
Content-Type: application/json

CODE

SMS DNC

The Compliance API supports the Create, Create Multiple, Delete, Search, List, Read, Update, and Get SMS DNC List Info methods for managing the SMS DNC settings.

The Phone DNC Type setting in the LiveVox Portal (Configure > Services > Client > Settings tab) determines which DNC methods you can use. If you use the wrong DNC methods, the API returns a 400 Bad Request error stating that you are not configured to use that particular method. If the Phone DNC Type is set to Legacy DNC, you can use any method under the DNC category in the documentation. If you have the Phone DNC Type set to Dial-Time Phone DNC, you can use the methods under the Dialtime/SMS/Email DNC category. By using the Is Legacy DNC Enabled method you can check what your Phone DNC Type is set to and ensure that you are using the correct methods.

Changing this setting affects the DNC list your site uses for dialing, do not change this setting just to test the APIs.
The "expirationDate" in requests can be in either yyyy-MM-dd format (for example, 2021-03-01) or epoch time in milliseconds (for example, 1616089284000). The "expirationDate" in a response is always in epoch time in milliseconds (for example, 1616089284000).

Create SMS DNC

Description: Creates an SMS DNC entry.

Method: POST /compliance/sms/dnc

Parameters:

None

Body:

Key	Type	Mandatory?	Description
sms	String	Yes	The phone number for which you are creating the SMS DNC entry. The format is a 10-digit string.
contactGroupId	Integer (ID)	No	The contact group assigned to the DNC entry.
expirationDate	dateTime	No	The expiration date of the SMS DNC entry.

Response Code: 201 Created

Body:

Key	Type	Mandatory?	Description
id	Integer (ID)	Yes	The ID for the created entry.

Create an Email DNC entry for the client

#Request (JSON)
POST /compliance/sms/dnc
Host: localhost.com
Content-Type: application/json
Accept: application/json

{
  "sms": "9176754178",
  "contactGroupId": 1020229,
  "expirationDate": "2021-10-26"
}

#Response (JSON)
201 Created
Content-Type: application/json

{
  "id": 159475304
}

CODE

Create Multiple SMS DNC

Description: Creates multiple SMS DNC entries in a single request.

Method: POST /compliance/sms/dnc/bulk

Parameters:

None

Body:

Key

Type

Mandatory?

Description

dncEntries

Array

Yes

An array of SMS DNC entries to create.

Key	Type	Mandatory?	Description
sms	String	Yes	The phone number for which you are creating the DNC entry. The format is a 10-digit string.
contactGroupId	Integer (ID)	No	The contact group assigned to the DNC entry.
expirationDate	dateTime	No	The expiration date of the SMS DNC entry.

Response Code: 200 OK

Body:

Key	Type	Mandatory?	Description
processedCount	Integer	Yes	Number of records processed

Create Multiple DNC Entries

#Request (JSON)
POST /compliance/sms/dnc/bulk
Host: localhost.com
Content-Type: application/json
Accept: application/json

{
  "dncEntries": [
    {
      "sms": "6503517497",
      "contactGroupId": 1020229,
      "expirationDate": "2021-10-27"
    },
    {
      "sms": "6505153873",
      "contactGroupId": 1020230,
      "expirationDate": "2021-10-26"
    },
    {
      "sms": "6178498807",
      "contactGroupId": 1020231,
      "expirationDate": "2021-10-28"
    }
  ]
}

#Response (JSON)
200 OK
Content-Type: application/json

{
  "processedCount": 3
}

CODE

Delete SMS DNC

Description: Deletes an SMS DNC entry.

Method: DELETE /compliance/sms/dnc/{dncId}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
dncId	dncId	Integer	Yes	Specifies the SMS DNC entry ID to be deleted.

Body:

None

Response Code: 204 No Content

Body:

None

Delete an Existing DNC Entry

#Request
DELETE /compliance/sms/dnc/159475304
Host: localhost.com
Content-Type: application/json
Accept: application/json  

#Response
204 No Content

CODE

Find Matching SMS DNC

Description: Finds matching SMS DNC entries.

Method: POST /compliance/sms/dnc/search?offset={n}&count={n}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
count	n	Integer	Yes	Specify the number of items to return in the list. There is a limit of 1000 items.
offset	n	Integer	Yes	Specifies the offset from 0, based on the count, from which to start listing.

Body:

Key

Type

Mandatory?

Description

filter

Object

Yes

DNC entries to create with the following structure

Key	Type	Mandatory?	Description
sms	String	No	The digit(s) of a phone number to search for the SMS DNC entry.
contactGroupId	Integer (ID)	No	The contact group ID to search.

Response Code: 200 OK

Body:

Key

Type

Mandatory?

Description

dncEntries

Array

Yes

An array of SMS DNC entries that match the filter criteria in the request.

Key	Type	Mandatory?	Description
id	Integer (ID)	Yes	The ID for the entry.
sms	String	Yes	The phone number of the SMS DNC entry.
contactGroupId	Integer (ID)	No	The contact group ID of the SMS DNC entry.
expirationDate	dateTime	No	The expiration date of the SMS DNC entry.

Find Matching DNC entries

#Request (JSON)
GET /compliance/sms/dnc/search?offset=0&count=6
Host: localhost.com
Content-Type: application/json
Accept: application/json  

{
  "filter": {
    "sms": "6",
    "contactGroupId": 1020229
  }
}

#Response
200 OK
Content-Type: application/json

{
  "dncEntries": [
    {
      "sms": "9176754178",
      "contactGroupId": 1020229,
      "expirationDate": 1635825600000,
      "dncId": 159475304
    },
    {
      "sms": "6503517497",
      "contactGroupId": 1020229,
      "expirationDate": 1635307200000,
      "dncId": 159475306
    },
    {
      "sms": "6505153873",
      "contactGroupId": 1020229,
      "expirationDate": 1635307200000,
      "dncId": 159533878
    }
  ]
}

CODE

Get SMS DNC List Info

Description: Retrieves metadata for a list of SMS DNC entries.

Method: GET /compliance/sms/dnc/info

Parameters:

None

Body:

None

Response Code: 200 OK

Body:

Key	Type	Mandatory?	Description
size	Integer	Yes	The number of SMS DNC entries currently loaded for that client.

Get the metadata for a list of DNC Entries

#Request (JSON)
GET /compliance/sms/dnc/info
Host: localhost.com 
Content-Type: application/json
Accept: application/json  

#Response (JSON)
200 OK
Content-Type: application/json

{
  "size": 7
}

CODE

List SMS DNC

Description: Lists SMS DNC entries.

Method: GET /compliance/sms/dnc?count={n}&offset={n}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
count	n	Integer	Yes	Specify the number of items to return in the list. There is a limit of 1000 items.
offset	n	Integer	Yes	Required for pagination. Specifies the offset from 0, based on the count parameter, from which to start listing.

Body:

None

Response Code: 200 OK

Body:

Key

Type

Mandatory?

Description

Yes

A URI for the next page of entries. If next is not present, or blank, then there are no pages after this one.

dncEntries

Array

Yes

A container for a page of SMS DNC entries. The page size is controlled using count and offset in the request.

Key	Type	Mandatory?	Description
id	Integer (ID)	Yes	The ID for the entry.
sms	String	Yes	The phone number of the SMS DNC entry.
contactGroupId	Integer (ID)	No	The contact group ID of the SMS entry.
expirationDate	dateTime	No	The expiration date of the SMS DNC entry.

Get a List of DNC Entries

#Request (JSON)
GET /compliance/sms/dnc?offset=0&count=5
Host: localhost.com 
Content-Type: application/json
Accept: application/json  

#Response
200 OK
Content-Type: application/json

{
  "next": "compliance/sms/dnc?offset=5&count=5",
  "dncEntries": [
    {
      "sms": "9176754178",
      "contactGroupId": 1020229,
      "expirationDate": 1635825600000,
      "dncId": 159475304
    },
    {
      "sms": "6503517497",
      "contactGroupId": 1020229,
      "expirationDate": 1635307200000,
      "dncId": 159475306
    },
    {
      "sms": "6178498807",
      "contactGroupId": 1020231,
      "expirationDate": 1635393600000,
      "dncId": 159475308
    },
    {
      "sms": "6505153873",
      "contactGroupId": 1020229,
      "expirationDate": 1635307200000,
      "dncId": 159533878
    },
    {
      "sms": "9176754178",
      "contactGroupId": 1020231,
      "expirationDate": 1635393600000,
      "dncId": 159533880
    }
  ]
}

CODE

Read SMS DNC

Description: Reads information about an SMS DNC entry.

Method: GET /compliance/sms/dnc/{dncId}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
dncId	dncId	Integer (ID)	Yes	Specifies the DNC entry ID to be read.

Body:

None

Response Code: 200 OK

Response Body:

Key	Type	Mandatory?	Description
id	Integer (ID)	Yes	The ID of the SMS DNC entry.
sms	String	Yes	The phone number of the SMS DNC entry.
contactGroupId	Integer (ID)	No	The contact group ID for the SMS DNC entry
expirationDate	dateTime	No	The expiration date of the SMS DNC entry.

Read a DNC Entry

#Request (JSON)
GET /compliance/sms/dnc/159475304
Host: localhost.com 
Content-Type: application/json
Accept: application/json   

#Response
200 OK
Content-Type: application/json

{
  "sms": "9176754178",
  "contactGroupId": 1020229,
  "expirationDate": 1635825600000,
  "dncId": 159475304
}

CODE

Update SMS DNC

Description: Updates an SMS DNC entry.

Method: PUT /compliance/sms/dnc/{dncId}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
dncId	dncId	Integer (ID)	Yes	Specifies the SMS DNC entry to update.

Body:

Key	Type	Mandatory?	Description
sms	String	Yes	The phone number of the SMS DNC entry to update.
contactGroupId	Integer (ID)	No	The new contact group assigned to the SMS DNC entry.
expirationDate	dateTime	No	The new expiration date of the SMS DNC entry.

Response Code: 204 No Content

Body:

None

Update an Existing DNC Entry

#Request (JSON)
PUT /compliance/sms/dnc/21945274  
Host: localhost.com 
Content-Type: application/json
Accept: application/json    

{
  "sms": "9176754178",
  "contactGroupId": 1020229,
  "expirationDate": "2021-11-02"
}

#Response
204 No Content
Content-Type: application/json

CODE

Recordings

The Recordings category allows users to Find Call Recordings, Delete Call Recordings, and Get Call Recordings By Id.

The Find Matching Call Recording method was removed in v9.0, clients should use the Call Recording Report available in the Reporting API instead.

Delete Call Recording By Id

Description: Deletes Call Recording for a given Call recording id

User Roles: Sysadmin

Method: DELETE /compliance/recording/{id}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
recording	recordingId	String	Yes	The `recordingId`, a unique identifier of the call recording that you wish to delete.

Body :

None

Response Code: 204 No Content

Body:

None

Delete a call recording based on unique call recording ID

#Request
DELETE /compliance/recording/adae2e80-0001-b950-2eaf-0178d9581c93
Host: localhost.com
Content-Type: application/json
Accept: application/json  

#Response 
204 No Content

CODE

Get Call Recording Info

Description: Retrieves metadata about a call recording based on unique Call Recording ID.

Method: GET /compliance/recording/info?recording={id}

Parameters:

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
recording	recordingId	String	Yes	The `recordingId`, a unique identifier of the call recording for which you want to retrieve metadata. You can obtain the '`recordingid'` for a call recording using the Call Recording Report API method.

Body:

None

Response Code: 200 OK

Body:

Key or Attribute	Type	Mandatory?	Description
clientId	Integer (ID)	Yes	The Client the call recording belongs to.
callCenterId	Integer (ID)	Yes	The ID of the Call Center that the Agent who was recorded is associated with.
serviceId	Integer (ID)	Yes	The ID of the Service to which the Agent was logged in when the call was recorded.
agentId	Integer (ID)	Yes	The ID of the Agent involved in the recorded call.
campaignId	Integer (ID)	Yes	The ID of the Campaign that the recorded call was part of.
account	String	Yes	The account of the consumer whose call was recorded.
phone	String	Yes	The phone number of the consumer whose call was recorded.
termCodeId	Integer (ID)	Yes	The Term Code of the recorded call.
fromDate	DateTime	Yes	The date and time that the call recording started.
toDate	DateTime	Yes	The date and time that the call recording ended.
originalAccountNumber	String	No	The original account number associated with the call recording. The `originalAccountNumber` will only be returned if you are on Reporting 3.0 or above.
duration	Integer	Yes	The duration of the call recording, in seconds.

Retrieve metadata for a call recording based on unique ID

#Request (JSON)
GET/compliance/recording/info?recording=8b4e88fe-2b9c-b6b1-d211-016c4d1b3ec6
Host: localhost.com
Content-Type: application/json
Accept: application/json

#Response (JSON)
200 OK
Content-Type: application/json

{
   "clientId": 4199,
   "callCenterId": 1191,
   "serviceId": 11846,
   "agentId": 45365,
   "campaignId": 1,
   "account": "002723754",
   "phone": "8015442100",
   "termCodeId": 200801,
   "fromDate": 1375727329697,
   "toDate": 1375727389697,
   "duration": 60
}

CODE

Get Call Recording By Id

Description: Returns Call Recording for a given customer session Id

Method: GET /compliance/recording/{id}

Path/Query Parameter Name	Variable Name	Type	Mandatory?	Description
recording	recordingId	String	Yes	The `recordingId`, a unique identifier of the call recording that you wish to lookup. You can obtain the '`recordingid'` for a call recording using the Call Recording Report API method.

Body :

None

Response Code: 200 OK

Body:

The body of this response is binary data that comprises the call recording (mp3).

CampaignDetails

#Request
GET /compliance/recording/8b4e88fe-2b9c-b6b1-d211-016c4d1b3ec6
Host: localhost.com
Content-Type: application/json
Accept: audio/mpeg
 
#Response
200 OK
Content-Type: audio/mpeg
 
[binary data]

XML

Errors

For more information, see the Errors topic on the REST APIs page.

Top of Page

Introduction

User Roles

Do Not Call Rules

Wildcard Support

API Methods

Compliance Check

Is Blocked

ZipAreaMatch

Dialing Profiles

Create Dialing Policy

Create Dialing Profiles

Delete Dialing Policy

Delete Dialing Profiles

Get Dialing Profile List Info

List Dialing Profiles

Read Dialing Profile

Update Dialing Policy

Update Dialing Profile

Update Dialing Profile Add Service

Update Dialing Profile Remove Service

Dialtime DNC

Create Dialtime DNC

Create Multiple Dialtime DNC

Delete Dialtime DNC

Find Matching Dialtime DNC

Get Dialtime DNC List Info

List Dialtime DNC

Read Dialtime DNC

Update Dialtime DNC

Email DNC

Create Email DNC

Create Multiple Email DNC

Delete Email DNC

Find Matching Email DNC

Get Email DNC List Info

List Email DNC

Read Email DNC

Update Email DNC

SMS DNC

Create SMS DNC

Create Multiple SMS DNC

Delete SMS DNC

Find Matching SMS DNC

Get SMS DNC List Info

List SMS DNC

Read SMS DNC

Update SMS DNC

Recordings

Delete Call Recording By Id

Get Call Recording Info

Get Call Recording By Id

Errors

Cookie Notice