Page tree

Introduction

LiveVox Wallboard is an independent web application that enables you to configure dashboards that display key performance indicators related to your call center volume (for inbound and outbound services) and agent or team productivity. Wallboard can display real-time metrics for the overall performance and progress of a call center (for example, average hold duration, average speed of answer, or call abandon rate). Wallboard can also highlight real-time problems that require the attention of a manager or supervisor (for example, when an agent has been in the same state for a long time, or when a service level agreement has been violated), through alerts.

A dashboard can be displayed on any screen such as a tablet, a desktop computer, or a widescreen office monitor, for private or public view, to enable you to monitor the activities related to your call center in real time. In general, a dashboard that appears on a large screen is called a wallboard. 

This document provides basic information and guidelines for managers or supervisors using LiveVox Wallboard. 

  • LiveVox Wallboard uses data from the LiveVox platform.
  • For additional help, contact the LiveVox Customer Care Team.

Getting Started

Before You Begin

Ensure that you have:

  • The web address for your QCS portal.
  • Your client code (name).
  • Your user name and password.
  • The Manager or Sysadmin role.

To get started:

  1. On your browser, in the Address bar, enter the Wallboard link provided by LiveVox.

    The Wallboard link is similar to https://client.livevox.com/qcsportal.


    The Sign in window appears.

  2. Enter your user name and password, and then click Sign in.

    The user name and password for logging on to Wallboard are the same as those for logging on to the LiveVox Portal (LVP).


    The Dashboard window appears.
    Dashboard with Real-Time Reports

Icon Descriptions

The following table describes some of the icons that appear in the Dashboard window.

IconDescription

Information Menu (Information Menu icon)

Enables you to view information about LiveVox (including customer support) and the user guide.

User Menu (User Menu icon)

Enables you to log out of Wallboard and view who is logged on to Wallboard.

Refresh all the panels (Refresh all the panels icon)

Enables you to refresh all the panels on the dashboard.

Dashboard layout (Dashboard layout icon)

Enables you to view the panels for upper, middle, and lower areas of the dashboard, which refer to the areas on the intended screen (wallboard). This icon also enables you to select the number of columns that you want to be displayed in an area. 

The maximum number of columns that can be displayed in an area is five.


Fullscreen (Fullscreen icon)

Enables you to hide the upper frame that displays the LiveVox logo and the Dashboard banner.

Dashboard Menu

The Dashboard menu contains a table that displays a list of all dashboards, which are grouped into the following types:

  • Personal: Represents a dashboard that only you can view.
  • Shared: Represents a dashboard that any user within your organization can view.
  • LiveVox: Represents a dashboard (template) that is configured by LiveVox.

    You can copy any type of dashboard and then modify it as needed.

The table displays the following columns:

  • Dashboard: Indicates the name of a dashboard.
  • Type: Indicates the type of dashboard (personal, shared, or template). 

    To change the type of a dashboard to personal (only you can access) or shared (any user can access), on the Dashboard menu, double-click the value, and then, as required, change the value to PERSONAL or SHARED.

  • Default: Indicates if a dashboard is displayed by default when you log on to Wallboard. 

    To display a dashboard by default when you log on to Wallboard, select the option in the Default column.

The table also displays the following icons:

  • Create a new dashboard (Create a New Dashboard icon): Enables you to create a dashboard.
  • Rename the selected dashboard (Rename the selected dashboard icon): Enables you to rename a dashboard.
  • Duplicate the selected dashboard (Duplicate the selected dashboard icon): Enables you to copy a dashboard.
  • Delete the selected dashboard (Delete the selected dashboard icon): Enables you to delete a dashboard.

    Before you rename, copy, or delete a dashboard, ensure that you have selected the dashboard on the Dashboard menu.

Dashboard Menu

Designing a Dashboard and Panel

To display a dashboard on a screen for you or others to see (that is, to use a dashboard as a wallboard), besides creating a dashboard, you must configure the panels of the dashboard such that they can be easily viewed on the intended screens (for example, widescreen office monitors). Such configuration also involves defining the font size and panel color as appropriate.

The following procedure describes how to create a dashboard and design its panel at the same time. You can, however, design a panel for a dashboard anytime.

You can create as many dashboards as you need. 

To create a dashboard and design its panel:

  1. On the Dashboard menu, click Create a new dashboard icon (Create a New Dashboard icon).
    The New dashboard row appears in the Personal section.

    You can change the type of dashboard to shared or personal anytime. For information about how to do so, see the Dashboard Menu section.

    A dashboard is created.

  2. Enter a name for the dashboard, and then close the Dashboard menu.

    You can rename the dashboard anytime. For information about how to do so, see the Dashboard Menu section.

    The New panel window appears.

    You can rename the panel anytime.

  3. Click the Edit this panel icon (Edit this panel icon).
    The Editor window appears.

    You can modify the font size and frame color for the panel by using gear icon

    • The default view of the panel is a grid (with rows and columns). You can, however, change the view. 
    • The names of the tabs that appear in the Editor window depend on the view. For example, for the grid view, the Rows and Columns tabs appear, whereas, for the bar chart view, the Bars and Topic tabs appear.
    • For more information, see the Panel Views section.

    The following steps in this procedure assume that you have retained the default view (Grid). 

  4. On the Rows tab, click expand icon.
    The following options (subjects) appear:
    • Agencies, call centers and services
    • Agents

  5. Select the subject for which you want to display the metrics on the panel.
    Parameters related to the selected subject appear, each displaying a checkbox.

    To view the checkboxes, expand the parameters.


  6. Select the checkbox next to each parameter for which you want to display the data on the panel.

    • To filter the parameters based on a name, in the Filter by label box, enter the name.
    • To select all the parameters at once, select the checkbox next to the subject.
    • To view only the selected parameters, click the Filter options icon (Filter options icon), and then select the Show selected only checkbox.


  7. On the Columns tab, click expand icon.
    The following options (statistic types) appear:
    • Historical stats: Past statistics for the current day (for example, last two hours or until the current time).
    • Real-time context: Statistics in real time.
  8. Select the statistic type for which you want to display the parameters on the panel.
    Parameters related to the selected statistic type appear, each displaying a checkbox.

    • To view the checkboxes, expand the parameters.
    • If you selected the Historical stats statistic type, the Interval menu appears, from which you can select one of the following periods for historical statistics:
      • Custom interval (a period that you want)
      • Day so far (a period starting from the time that the current day began until the current time)
      • Last two hours
      • Last hour
      • Last 30 minutes
      • Last 15 minutes
    • To learn about a parameter, hover over it. For more information about the parameters, see the Statistics section.
    • Some parameters appear in a color other than black. The parameters that appear in the same color (other than black) together represent a group, which is used in the calculation of percentages in some panels of the dashboard.
      Parameter Groups
  9. Select the checkbox next to each parameter for which you want to display the data on the panel.

    • To filter the parameters based on a name, in the Filter by label box, enter the name.
    • To select all the parameters at once, select the checkbox next to the statistic type.
    • To view only the selected parameters, click the Filter options icon (Filter options icon), and then select the Show selected only checkbox.


  10. If you want the data for the selected parameters to be sorted in ascending or descending order:

    1. On the Sort By menu, click the Add a new sort criterion icon (Add a new sort criterion icon).
      Sort By Menu
    2. Double-click the Sort by cell.
      A list of selected parameters appears.
    3. Select the parameter whose data you want to be sorted in ascending or descending order, and then, as required, select the option in the ASC (ascending) or DESC (descending) column.

      • You can add multiple sort criteria by using Add a new sort criterion icon.
      • You can modify the order of sorting by using the drag-and-drop operation within the table.
      • You can delete a sort criterion by using the Delete the selected criterion icon (Delete the selected criterion icon).
  11. If you want to define the service-level agreement values (SLAs) for the applicable parameters (based on which alerts are displayed) for the panel:

    1. Click the SLA tab.
      A table with the selected statistic parameters appears.
      SLA Tab
    2. In the rows displaying the parameters for which you want to define SLAs, as required, in the Too low and Too high columns:
      1. Double-click the Violation cell, and then enter a value.
      2. Double-click the Warning cell, and then enter a value.
    3. If you want the SLAs that you have defined for a parameter to take precedence over the default SLAs, select the Override checkbox in the row displaying that parameter.

      For information about SLAs, see the SLAs section.

    4. Click gear icon.
      The Abandon threshold field appears.

      • Abandon threshold refers to the time period beyond which a call is considered abandoned when disconnected by a customer. This value is represented in seconds.
      • By default, the Abandon threshold field displays the Default value, which refers to the abandon threshold set for all dashboards (global preference). For more information, see the Defining Default Abandon Threshold section.
    5. Select a value in the field.


  12. Click Apply.
    A preview of your changes appears next to the Editor window.

  13. In the preview pane, click new panel window gear icon.
    The Percentages option appears.

    For the pie chart view, the Display mode option also appears, hovering over which displays the following options:

    • Labels only: Displays a label for each pie of the chart next to the pie.
    • Legend only: Displays a section describing each pie of the chart outside the chart.  
    • Labels & legend: Displays both labels and legend.


  14. Hover over the Percentages option, and then select one of the following options:
    • Percentages only: Displays the data on the panel in percentages.
    • Values only: Displays the data on the panel in values. 
    • Values & Percentages: Displays the data on the panel in both values and percentages.

      You can revert all your changes (before you save them) by using the Undo pending edits icon (Undo pending edits icon).


  15. Click the Save changes icon (Save changes icon).
    Your changes are saved.

    If you modify the panel and click the Undo pending edits icon (Undo pending edits icon), all the changes made to the panel until the current time—including those that were earlier saved by using the Save changes icon (Save changes icon)—are lost. 


To create another panel for the dashboard, on the Panel menu, use the Add a panel to the selected dashboard icon ().
Panel Menu

Panel Views

When designing a panel, you can specify the view in which you want the panel to appear on the dashboard.

View Options in the Editor Window

The following table contains an image as an example to represent each view.

ViewExample
Array (horizontal)

Horizontal Array

Array (vertical)

Vertical Array

Bar chart

Bar Chart

Column chart

Column Chart

Grid

Grid

Pie chart

Pie Chart

Speedometer

Speedometer

Sunburst chart

Sunburst Chart

The following table contains the names of the tabs that appear in the Editor window when designing a panel, for each view.

ViewTabs
Array (horizontal)
  • Topic
  • Tiles
Array (vertical)
Bar chart
  • Bars
  • Topic
Column chart
Grid
  • Rows
  • Columns
Pie chart
  • Pie wedges
  • Topic
Speedometer
  • Topic
  • Measure
Sunburst chart
  • Sunburst wedges
  • Topic

For the bar, column, pie, and sunburst charts, in the Editor window, you can select the following types of colors by using the Colors menu:

  • Monochrome: Displays the sections of the chart in various shades of the same color.
  • Pastels: Displays the sections of the chart in pastel colors.
  • Single hue: Displays the sections of the chart in the same color.
    Colors Menu

In the Editor window, you can also modify the font size and the frame color for the panel by using editor window gear icon.

Viewing a Dashboard and its Panels

To view a dashboard and all its panels:

  1. On the Dashboard menu, select the dashboard that you want to view.
  2. On the Panel menu, select All Panels.
    The dashboard and its panels appear. 

  • If you want to view or modify a specific panel of the dashboard, on the Panel menu, select the panel.
  • The display of the panels on your dashboard depends on the area that you may have selected to be shown. To view the panels assigned to all areas (upper, middle, and lower), click the Dashboard layout icon (Dashboard layout icon), and then select the Show checkbox next to each area. If you want to save your changes for the dashboard, click the Save changes icon (Save changes icon).
    Dashboard Layout Opened
  • The statistics in a panel are refreshed every five seconds as indicated by the movement of the Refresh icon () in the panel.
  • You can modify the position of the panels on a dashboard by dragging them to where you want them within the window.
  • You can define how you want the data to be displayed by using gear icon.

Customizing a Panel Grid

You can customize the grid in a panel on a dashboard as follows:

  • If applicable, you can expand the rows in the first column by using expand icon.
    Expand Rows
  • You can modify the order of the applicable columns by using the drag-and-drop operation within the grid.
  • You can sort the rows in a grid in ascending or descending order based on a column by clicking the column.
  • You can display or hide certain columns in a grid on a panel. To do so:
    1. Hover over any column in the grid, and then select the drop-down menu.
      The Columns menu displaying a checkbox next to each column appears.
      Columns menu
    2. If you want to hide a column in the grid, clear the checkbox next to the column. Otherwise, select the checkbox.

Panel Menu

The Panel menu contains a table of all panels for the dashboard that you have selected on the Dashboard menu. The panels are grouped into the following categories:

  • Upper area: Represents a panel that appears in the upper area on a wallboard.
  • Middle area: Represents a panel that appears in the middle area on a wallboard.
  • Lower area: Represents a panel that appears in the lower area on a wallboard.


You can change the area of a panel by dragging it to the area where you want it, within the table. 

The table displays the following columns:

  • Panel: Indicates the name of a panel.
  • Type: Indicates the type of view for a panel (for example, grid or array).
  • Subject: Indicates the subject used for the panel (for example, agents or services).
  • Statistics: Indicates the type of statistics used for the panel (for example, historical or real-time).
  • Interval: Indicates the interval used for the panel (for example, last hour or last 15 minutes) if the statistic type of the panel is historical.
  • Sort: Indicates the type of sorting used for the entries in the panel (for example, ascending or descending order).

The table also displays the following icons:

  • Add a panel to the selected dashboard (Create a New Dashboard icon): Enables you to create a panel for the dashboard that you have selected on the Dashboard menu.
  • Rename the selected panel (Rename the selected dashboard icon): Enables you to rename a panel.
  • Duplicate the selected panel (Duplicate the selected dashboard icon): Enables you to copy a panel.
  • Delete the selected panel (Delete the selected dashboard icon): Enables you to delete a panel.

    Before you rename, copy, or delete a panel, ensure that you have selected the panel on the Panel menu.

Panel Menu

SLAs

Overview

A service-level agreement (SLA) defines the level of service that you want to provide to your customers. Defining an SLA involves specifying the threshold values (limits) for the applicable statistic parameters.

You can define SLAs for the applicable parameters so that you are notified through alerts when a limit is exceeded. Wallboard provides the following types of SLAs:

  • Default SLAs: Also called client SLAs, these SLAs apply to each dashboard and each user of the dashboard. Default SLAs can be defined only for real-time statistics.
  • Panel-Level SLAs: These SLAs are specific to a panel on a dashboard. When you design a panel, you can define SLAs for historical or real-time statistics. However, for a parameter, the default SLAs take precedence over the panel-level SLAs unless you select the Override checkbox for the parameter when defining its panel-level SLA. 

    For information about how to define panel-level SLAs, see the Designing a Dashboard and Panel section (Step 11).

How SLA Violations Are Indicated

When an SLA is violated (that is, when a statistic parameter exceeds its specified limits):

  • A sound (alarm) is played briefly.
  • A notification indicating in which panel the violation has occurred appears on the dashboard.
    Dashboard Alert
  • A flashing banner appears in the panel in which the violation has occurred. Depending on the panel view (for example, grid or pie chart), the panel in which the violation occurred highlights the problematic values in red. This banner disappears only when the statistic parameter that resulted in the alarm returns to a normal value.
    Grid Alert

    When a value reaches 20% of the SLA limit, it is highlighted in orange.

  • If your browser is minimized, a notification informing you of the violation appears on your desktop. 

In a panel displaying a speedometer, the chart is divided into three sectors based on SLAs. The needle that appears in the speedometer indicates if the SLAs are violated. The sectors are displayed in the following colors:

  • Green: This sector ends at 80% of the SLA limit. A needle in this sector indicates that no violation has occurred or is likely to occur.
  • Orange: This sector begins at 80% of the SLA limit. A needle in this sector indicates a warning (that is, a violation is likely to occur).
  • Red: This sector ends at 20% of the SLA limit. A needle in this sector indicates that a violation has occurred.
    Speedometer Alert

Default SLAs Versus Panel-Level SLAs

The following table describes the logic that determines which SLA is applicable for a given statistic parameter based on the value in the Override checkbox.

The Override checkbox appears in the Editor window when you define panel-level SLAs.


Panel-Level SLAOverrideApplicable SLA Note
Value (other than None)YesPanel-level SLATo be used if you want the panel-level SLAs to be applied to the parameter.
NoneYesNoneTo be used if you do not want any SLA to be applied to the parameter.
Any valueNoDefault SLA (if any)To be used if you want the default SLAs to be applied to the parameter while ensuring that the panel-level SLA limits are not deleted.

Defining Default SLAs

To define default SLAs:

  1. On the toolbar, click gear icon.
    The Default SLA tab appears.
  2. On the Default SLA tab, in the rows displaying the statistic parameters for which you want to define default SLAs, as required, in the Too low and Too high columns:
    1. Double-click the Violation cell, and then enter a value.
    2. Double-click the Warning cell, and then enter a value.
      Default SLA Tab

      The Not ready duration statistic parameter is split to accommodate the reasons for an agent to not be in the Ready state. You can specify different SLAs for each of them as appropriate (for example, one hour for lunch or 15 minutes for break, as represented in the following image). 
      Not Ready Duration SLAs


      • You can revert all your changes (before you save them) by using the Undo client SLA changes icon (Undo client SLA changes icon).
      • You can refresh the tab (to see the latest values) by using the Click to get the last client SLA icon (Click to get the last client SLA icon).
  3. Click the Save client SLA changes icon (Save client SLA changes icon).
    Default SLAs are saved.

Defining Default Abandon Threshold

A call is considered abandoned only if a customer abandons the call after a certain period. This period is called the default abandon threshold and is represented in seconds.

To define the default abandon threshold globally (that is, for all the dashboard and their panels):

  1. On the toolbar, click gear icon.
  2. On the Preferences tab, in the Default abandon threshold field, select a value.

    The options in the Default abandon threshold field represent seconds.

    You can revert your change (before you save it) by using the Undo client SLA changes icon (Undo client SLA changes icon).

  3. Click the Save client SLA changes icon (Save client SLA changes icon).
    The default abandon threshold is saved.

Changing Agent States

As a manager, you can change the state of your agents through the dashboard panels that display agent real-time statistics in a grid. In addition, you can log your agents out. The state of only those agents who are in the Hold, Not Ready, Ready, or Wrap Up state can be changed. You can also send them a message before changing the state.

To change the state of your agents:

  1. On the dashboard, in the panel, click gear icon.
    The Plugins option displaying the Change agent state option appears.
    Plugins option
  2. Select the Change agent state option.
    A checkbox appears next to the name of each agent in the Agent column.
  3. Select the checkbox next to the name of each agent whose state you want to change, and then, as required, click Force ReadyForce Not Ready or Force Logoff.
    The Info window appears.
  4. If you want to send a message to the selected agents before changing their state, enter your message in the window.
  5. Click OK.
    The state of the selected agents is changed, and their updated state appears in the State column. If you had clicked Force Logoff, the selected agents are logged out and their names no longer appear in the grid.

Chatting With Agents

As a manager, you can chat with your agents individually or cumulatively. To chat with your agents:

  1. On the dashboard, in the panel, click gear icon.
    The Plugins option displaying the Chat option appears.
  2. Select the Chat option.
    A checkbox appears next to the name of each agent in the Agent column.
  3. Select the checkbox next to the name of each agent with whom you want to chat.
    Chat To Section
  4. In the Chat to section, click the Choose the agent you wish to chat with icon (Choose the agent you wish to chat with icon) .
    A list of the selected agents, along with the option All, appears.
  5. If you want to chat with all the selected agents simultaneously, select the All option. Otherwise, select the name of the agent with whom you want to chat.
  6. In the Chat to section, in the text box, enter your message to the agents, and then click Send.
    Your message is sent to the agents.

    • If an agent responds to your message, the response appears in the Chat to section.
    • If an agent sends you a message while you are chatting with another agent, letter icon appears in the Chat to section. When you click letter icon, the name of the agent whose message is unread appears with letter icon next to it. You can select the name to read the message.
      Unread Chat

Statistics

The following table describes the statistic parameters (reporting elements) used on the panels. 

When designing a panel, these parameters appear in the Editor window depending on your selection of the subject and statistic type.

SubjectStatistic TypeStatisticParameterDescription
Agencies, call centers, and services

Historical

Call countsAbandoned calls above service level threshold

Total number of calls that failed to be transferred to an operator with a transfer hold duration greater than your service level limit.

Abandoned calls below service level threshold

Total number of calls that failed to be transferred to an operator with a transfer hold duration less than your service level limit.

Accounts attemptedTotal number of unique account numbers that were attempted to be contacted.
Calls attemptedTotal number of attempted calls.
ConnectedTotal number of connected calls.
Failed operator transfersTotal number of calls for which operator transfer failed.
In personTotal number of right party contacts and wrong party contacts.
Promise to pay calls

Total number of calls in which customers agreed to pay a certain amount of money (for example, when a payment had been overdue).

Right party contactsTotal number of calls that were made to the intended party. 
Wrong party contacts

Total number of calls that were made to the unintended party. 

Successful calls above service level threshold

Total number of calls that were transferred to an operator with a transfer hold duration greater than your service level limit.

Successful calls below service level threshold

Total number of calls that were transferred to an operator with a transfer hold duration less than your service level limit.

Successful operator transfers

Total number of calls that were transferred to an operator.

Total inbound callsTotal number of inbound (mobile originated) calls.
State durations
















Average abandon time

Average time that your customers waited in the queue before abandoning calls.

Average delay

Average time that your customers spent interacting with the IVR (Interactive Voice Response).

Average handle time

Average time that your agents spent handling calls from start to finish (including wrap-up time).


Average in call time

Average time that your agents spent on calls.


Average ready timeAverage time that your agents were ready to place or receive calls (Ready state).
Average talk time

Average time that your agents spent talking to customers. This does not include hold or wrap-up time.

Average wrap up time

Average time that your agents spent wrapping up calls.

Hold time

Total time that your customers were placed on hold by agents during calls.

In call time

Total time that your agents spent on calls talking to customers.

IVR time

Total time that your customers spent interacting with the IVR before they were connected to an agent.

Not ready timeTotal time that your agents were not ready to place or receive calls (Not Ready state).
Preview dial time

Total time that your agents spent previewing the dial options. 

The preview dial options include dialing the number that is offered in the Preview Dialing window, skipping the number and moving to the next account, and manually dialing a different number.

Ready timeTotal time that your agents were ready to place or receive calls (Ready state).
Right party in call time

Total time that your agents spent on calls with the intended party.

Right party wrap up time

Total time that your agents spent wrapping up calls with the intended party.

Total time logged inTotal time that your agents were signed in.
Transfer timeTotal time that your agents spent transferring calls.
Wrap up time

Total time that your agents spent wrapping up calls (Wrap Up state).

NoneConversion rate

Average number of promise-to-pay calls against the right party contacts.

FTE (Full-Time Equivalent)

Average time that your agents spent handling calls from start to finish (including wrap-up time) against a 6.5-hour workday.

Occupancy rate

Total time that your agents spent handling calls against the total time that they were signed in.

Percent abandon rate

Average number of abandoned calls below service level limit against the number of offered contacts.

Percent right party

Average number of calls that were made to the intended party against the number of offered contacts.

Percent service level

Average of the sum of the total abandoned calls below service level limit and total successful calls below service level limit against the number of handled contacts.

AgentsNoneCalls handledTotal number of calls handled by your agents, from start to finish.
Inbound callsTotal number of inbound (mobile originated) calls.
Outbound callsTotal number of outbound (mobile terminated) calls.
Total offeredTotal number of calls offered to your agents, which includes both handled calls and abandoned calls.
State durationsHold timeTotal time that your customers were placed on hold by agents during calls.
In call timeTotal time that your agents spent on calls talking to customers.
Not ready timeTotal time that your agents were not ready to place or receive calls (Not Ready state).
Ready timeTotal time that your agents were ready to place or receive calls (Ready state).
Total time logged inTotal time that your agents were signed in.
Transfer timeTotal time that your agents spent transferring calls.
Wrap up timeTotal time that your agents spent wrapping up calls (Wrap Up state).
Agencies, call centers, and services



Real-time





















Call countsDialableTotal number of contacts that are loaded into your service and whose numbers can be dialed.

Loaded

Total number of contacts that are loaded into the service.
Remaining

Total number of dialable contacts whose numbers are remaining to be dialed.

Total abandoned

Total number of calls that customers disconnected (abandoned) before connecting to an agent.

Total calls abandoned within SLATotal number of calls that were abandoned by your customers within your service level limit.
Total calls answered within SLA

Total number of calls that were answered by your agents within your service-level limit.

Total handledTotal number of calls that your agents handled.
Total offered

Total number of calls that were offered to your agents. This includes both handled calls and abandoned calls.

Durations



Average duration to abandon

Total time of abandoned calls against the total number of abandoned calls.

Average handle duration

Total time of handled calls against the total number of handled calls.

Average speed of answer

Total time taken for calls to be answered against the total number of handled calls.

Average talk duration

Total time that your agents spent talking to your customers against the total number of handled calls.

Average wrap up durationTotal time that your agents spent wrapping up calls against the total number of handled calls.
Current activityCalls with agentTotal number of calls that are currently with agents.
Outbound CIP

Total number of outbound calls that are currently in progress.

Total agentsTotal number of agents who are signed into the service.
Total calls in queueTotal number of calls that are waiting to be transferred to an agent.
NoneAbandon rate

Total number of offered calls against the total number of abandoned calls.

Percentage completeTotal number of contacts whose numbers are remaining to be dialed against the total number of contacts whose numbers can be dialed.
Queue timeAverage time that calls were in the queue.
Service levelYour defined service level.
Agents















NoneCurrent activity







Agent login ID

Logon ID of the agent.

Call center ID

ID of the call center.

Call center name

Name of the call center.

Service ID

ID of the service.

Service name

Name of the service.

AccountAccount number of the customer.
Agent skillSkill that an agent has to attend to the customer.
Call typeType of call (inbound or outbound).
Is agent monitoredIndicates if an agent is being monitored.
PhonePhone number of the customer.
Reason code

Reason that an agent is not ready to place or receive calls.

Session IDSession ID for the call.
StateCurrent state of an agent.
State durationTotal time that an agent has spent in their current state.
Counts

Inbound callsTotal number of inbound (mobile originated) calls.
Outbound callsTotal number of outbound (mobile terminated) calls.
Total callsTotal number of all types of calls.

Wallboard for Agents

You can enable your agents to view the Wallboard through the External App section of their Agent Desktop. This section can be configured by using the Frame element on the Designer tool of LVP. 

For information about the Designer tool, see the Designer Guide in the User Hub. 


LiveVox Customer Care Contacts

24 Hour Customer Care Line: (888) 477-3448
LiveVox Customer Care Email: customercare@livevox.com
 
This document is an unpublished work protected by the United States copyright laws and is proprietary to LiveVox, Inc. (“LiveVox”).  Disclosure, copying, reproduction, merger, translation, modification, enhancement, or use by anyone other than authorized employees, clients or licensees of LiveVox, and its affiliate companies, without the prior written consent of LiveVox, is prohibited.  This document is intended as a guide to assist users of systems provided by LiveVox, and does not constitute the provision by LiveVox of any legal or compliance advice.  Compliance by authorized clients or licensees of LiveVox with all applicable local, state, federal, or foreign laws and regulations is the sole responsibility of those authorized clients or licensees.  Further, features and services that rely on third party performance are subject to the errors and omissions of those third parties, over which LiveVox has no control.  LiveVox therefore disclaims all liability resulting from or arising out of any services supplied by or through any third-party vendor or any acts or omissions of the applicable third party vendor.  Additionally, LiveVox makes no representations or warranties with respect to the accuracy of content supplied by parties other than LiveVox. 


For Internal and Client Use Only


  • No labels