Training Hub

Page tree

Versions Compared

Old Version 9

changes.mady.by.user Manisha Hegde

Saved on

compared with

New Version Current

changes.mady.by.user Manisha Hegde

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

iconfalse
titleContents

Table of Contents

Overview

The Qualify Test is a snapshot of the current Internet connection between your system the network your affected agents are using and the LiveVox application. The test is intended , intended to gauge the health of your Internet connection. This document provides an overview of the test and answers to some frequently asked questions.

Warning
iconfalse

You must run the Qualify Test only when an issue occurs (as opposed to running it . Do not run the test when an issue does not currently exist or if the issue occurred in the past).

Qualify Test Site

The following table contains links to the Qualify Test site for the various LiveVox environments.

EnvironmentQualify Test Link
NA3

https://qualify.na3.livevox.com/

Warning
iconfalse
  • This link is only applicable to
only
  • versions
earlier than
  • prior to U12.
  • If you are using U12 or
a
  • later version, your environment is NA3.VA2. The Qualify Test site does not exist for NA3.VA2.
  • If you encounter an issue in U12 or
a
  • later version, see the following section: 
What to Do
  • If You Cannot Run the Qualify Test
?


NA4https://qualify.na4.livevox.com/
NA5https://qualify.na5.livevox.com/
NA6https://qualify.na6.livevox.com/

...

Running the Qualify Test

To run the Qualify Test:

  1. Go to the Qualify Test site for your environment.
    The VoIP Qualification Test page appears.
    VoIP Qualification Test PageImage Added

  2. Download Visualware Browser Compatibility Service (BCS) by using the here link on the page, and then run it on your computer.

    Tip
    iconfalse

    To understand what the test parameters such as jitter or packet loss mean, click the Understand results link.


  3. In the Site Information section, specify values in the fields, and then click START TEST.
    The test results appear on the page.

    Info
    iconfalse

    The test results may take up to five minutes to appear on the page.


    Tip
    iconfalse

    You can reload the page by clicking STOP TEST.

    Qualification Test ResultsImage Added

  4. If you want to share the test results with LiveVox, click EMAIL RESULTS.
    An email containing the test results is sent to LiveVox. 

    Info
    iconfalse

    The subject line of the email begins with the following text: VoIP Quality Report


If an Issue Occurred In the Past

If an issue occurred earlierin the past:

  • Keep monitoring Constantly monitor the Internet connection between your system and the network your affected agents are using and the LiveVox application.
  • Provide the following information (at a minimum) about the occurrence  occurrence to LiveVox:
    • Timestamps
    • Call examples
    • Number of affected agents
    • Number of affected locations
    • How the agent was establishing the audio path
Warning
iconfalse

Run the Qualify Test only when an issue occurs.

How LiveVox Troubleshoots

You can send the results of the Qualify Test to LiveVox via email.

...

LiveVox Troubleshooting Methodologies

The following sections describe the steps that LiveVox performs depending on the test results displayed in the VoIP Quality Report email. 

Expand
titleRoute Test Results

Introduction: Route test measures the speed and route a data packet takes to a destination server.

Info
iconfalse

This test works by sending test packets of data to a specific destination address and records each device (represented as hops) passed by the data on its journey. A minimum, maximum, and average response time measurement is recorded per hop.

Objective: Number of hops is must not be more than 20. 

Test: In the Route Results section of the email, click the Detailed Route Results link. The My Connection Server page appears. In the Route Test section on the page, check the number of hops.
Route Tests SectionImage Modified

Info
iconfalse

In this image, the number of hops is 14, which is not an issue.


Issue Resolution: If the number of hops is more than 20, LiveVox will does not escalate the case and will ask you to . You must contact your Internet service provider to identify the cause of the issue. 

Info
iconfalse

If you insist that want LiveVox to pursue the case, the case will be is escalated while ensuring that the route result is noted.



If you insist that LiveVox pursue the case, the case will be escalated while ensuring that the test result is noted.

Issue Resolution: If an objective is not met, LiveVox will does not escalate the case and will ask you to . You must contact your Internet service provider to identify the cause of the issue. 

Expand
titleVoIP Test Results

Introduction: VoIP test emulates VoIP calls by using the selected codec and number of lines to provide a Mean Opinion Score (MOS) based on a combination of results. 

Info
iconfalse

MOS is a metric to assess the overall quality of a call. 

Objectives:

  • Average round-trip time (RTT) is must not be more than 200 ms.

    Note
    iconfalse

    If the agents are in locations such as India located in countries outside the United States of America, such as India or the Philippines, the maximum average RTT should must not be more than 300 ms.


  • Upstream and downstream jitter is must not be more than 20 ms.

  • MOS is must not be less than 3. 

    Info
    iconfalse
    • Minimum MOS: 0 (worst)
    • Maximum MOS: 4.2 (best)


  • Upstream and downstream packet loss is not 3%-4% because must not be more than 3% because this could affect audio quality.

Test: In the VoIP Results section of the email, click the Detailed VoIP Results link. The My Connection Server page appears. In the Summary section on the page, check the values for the aforementioned parameters.
 Summary SectionImage Modified

Info
Info

If you insist that want LiveVox to pursue the case, the case will be is escalated while ensuring that the VoIP result is noted.



Expand
titleFirewall Test Results

Introduction: Firewall test checks if outbound communication to the LiveVox application ports is permitted by your network devices. 

note
Info
iconfalse

Outbound communication to the LiveVox application ports is required for the platform to function correctly. Blocked ports may result in the loss or degradation of service.

iconfalse

If the result of this test shows Blocked, contact the LiveVox Customer Care Team.

Objective: Ports are must not be blocked.

Test: In the In the Firewall Results section of the email, check if the ports are reported as blocked.

Issue Resolution: If the ports are reported as blocked, contact the LiveVox Customer Care Team.

Info
iconfalse

The following table describes the standard use of each port.

PortUse
TCP 443Web traffic (HTTPS).
TCP 8080WebRTC traffic (web and audio paths established simultaneously).
UDP 5060
Session InIP
SIP-Trunks when your
Private Branch Exchange (
PBX
)
does not support encryption with TLS version 1.2.
TCP 5061SIP-Trunks when your PBX supports encryption with TLS version 1.2. Also used for sLVC
(99
.
9% of the clients use the Secured accounts)
 
TCP 5071sLVT (hard-phones supported: Polycom VVX-310 and SoundPoint-331).
UDP 15000-30000RTP streams (audio).



Note
iconfalse

A blocked port can be considered to be the cause of an the issue depending on your voice implementation of the port (that is, how you establish have established the audio path). If the port that is intended for establishing the audio path is reported as blocked, you are asked to enable the port. For example, if you are establishing cannot establish the audio path via WebRTC and the test result shows that the port TCP 5061 8080 is blocked but TCP 8080 is enabled, this is not the cause of the issue, you are asked to enable the port.


Warning
iconfalse

Ports must be If you are asked to enable a port, ensure that the port is enabled only in the outbound direction. 

...


If You Cannot Run the Qualify Test

...

iconfalse

...

If you cannot run the Qualify Test due to security reasons or

...

because you are using the NA3.VA2 environment

...

Perform , perform the following steps:

  1. Have your IT department run the following commands from the affected network:
  2. Send the results of the commands to LiveVox.Escalate the case.

Include Page
Disclaimer
Disclaimer