Page History

Introduction

This document provides an overview of the LiveVox Adding/Appending Records to Active Campaigns features.

Features

• LiveVox platform v.5 and above versions support campaign APIs for campaign appendingsupport Append Campaign Record APIs.
• Only Sysadmin, Superuser, and Manager user role types have access to campaign appends. 
  
• Records can only be appended to "today's” campaigns. Enhanced campaign append functionality which allows the service level dialing sort to be superseded for priority record handling is available as of LiveVox U10. This allows appended campaign records to be handled with priority over existing campaign records.  
• Requeue campaigns do not support append functionality.
• The 'Append Campaign Record' API method only works on campaigns that have the Allow Append option enabled.
• New records can be appended to active campaigns only in Built, Pause, or Play status. New transactions appended to campaigns in the Stop status are not supported.
• The target Campaign ID is required to use this functionality. The Campaign ID can be retrieved from during the campaign upload process , but the campaign must be built for the API to append records. You can also get the Campaign ID by recording the Campaign ID number from the portal. or by using the 'Find Matching Campaigns' API method. For more information, see Find the Campaign ID.
• It is recommended that you use the 'FindMatchingCampaigns' API method to gather the Campaign ID and then use that information to insert the Campaign ID into the 'Append Campaign Record' API call. For more information, see the User Hub’s Developer Portal under the Campaign API documentation section regarding the ‘Find Matching Campaigns’ and ‘Append Campaign Record’ API. The Developer Portal is available from the Resources drop-down menu in the voice portal:
  
  

Special Considerations

• It is recommended that you append records every 20 seconds (API must not be called more than 5 times per rolling minute).
• Only 10 Up to 30 phone numbers are can be appended per record.
• The Campaign build functionality applies only to the initial build but not to the appended records. Tasks such as cell phone scrub or duplicate number checking are not performed on the appended records.
• API method requires only Phone_1 (or 1 phone number) at a minimum to append the records.
• Appends are limited to a maximum of 10,000 records per API call.
• Campaigns that can be appended Normally uploaded campaign records will follow the configured dialing sort rules set at the service level and are restored after each successful append request.
• Set the service’s dialing sort to, “Inverted Consecutive” to dial the newly appended records at the next opportunity. This dialing sort uses the order in which records are loaded, from the last record to the first record for dialing purposes. 
• .
• All appended records to the target campaign are handled with priority (by default) with a first in first out method.
• Campaign Appends do Appends does not apply to the following Campaign Types:
  • CALLBACK
  • INBOUND
  • SCHEDULED_CALLBACK
  • MANUAL

Append Campaign Functionality

Anchor
eca eca

Enable Campaign Appends 

You can enable Campaign Appends in the Client section of the voice portal by following the procedure below:

1. Navigate to Configure > Client/Service > Client > Settings tab.
2. Click Campaign Appends Allowed in the Advanced Features section.
   
   

Anchor
aca aca

Allow Append Campaigns

To allow appending on a campaign, follow the procedure below:

1. When uploading a campaign, click the Allow Append option from the Advanced tab. This allows campaign records to be appended to the active campaign.
   

   Note
   You can find the upload a file option by navigating to Configure > Campaigns > Campaigns from the navigation panel. Detailed instructions on uploading a campaign and assigning dialing characteristics are available in the User Guide on User Hub.

   

2. Click Upload to upload the campaign file.

Campaign files with campaign append allowed display a green checkmark check mark in the Allows Append column in the Campaigns section. You must enable the Allow Append column view through the Customize Campaigns Grid configuration option as this is not visible in the default Campaigns view.

The Allow Append option is also viewable in the Campaign details screen but cannot be modified.

Anchor
acred acred

Append Campaigns Report at End of Day

The Services section displays the Append Campaigns Report at End of Day in the Settings tab.

• If enabled, append enabled campaigns generate a report at the end of the day.
• If disabled, campaigns report when they run out of records. Once a campaign generates a report, no further records can be appended to the campaign.

Appending Records to Active Campaigns

Appending records to active campaigns uses the Append Campaign Record API method. For more information on using LiveVox APIs, see the Developer Portal. Follow the procedure below to append new records to campaigns.

Anchor
eus eus

1. Establish User Session

To append records, you must establish a user session with the LiveVox platform. The session API is necessary because it returns a 'session Id' which must be passed with every subsequent API call. The session API requires three elements to login – client name, username, and password. The session API accepts both User and Agent credentials.

User accounts can access the LiveVox voice portal (LVP) https://login.livevox.com, which allows them to perform administrative tasks on the platform. Agent accounts are used to log into the ACD to make and receive calls. For this section, a user account is used. To determine if you are using a user or agent account, log in to the LiveVox Portal. If you can log in to the LiveVox portal, you can log in to the LiveVox APIs as a user. If you are unable to log in to the LiveVox Platform, contact support@livevox.com for help in troubleshooting the issue.

Once the API request is made, a response containing the 'session id' and the client id to be used in subsequent requests is returned.

Anchor
fci fci

2. Find the Campaign ID

You can locate the Campaign ID by using the Find Matching Campaigns API. Before using the Find Matching Campaigns API, the campaign must have a Campaign ID on the platform. You can generate a Campaign ID by loading the initial file into the platform. Once the file is loaded, the Campaign ID is generated as shown below on the General tab of the Campaign details.

To locate the appropriate Campaign ID, you must load the initial file at a certain time of day and then use the Find Matching Campaigns API to search by the time and Service ID associated with the campaign. You can also supply the expected state and type when searching as well. This provides the Campaign ID to use in subsequent append requests to that campaign.

Search for campaigns for client id limited to only 10 records at a time. Specify the date Range with a 15-minute interval in the "from" and "to" element.  The "from" and "to" values are in milliseconds since Epoch uses a third-party site, https://currentmillis.com, to aid in generating the values. The "state" element is set to match the possible states we expect the campaign to be in when performing the search. The "service" element contains the Service ID that the campaign is configured for in the platform. The "type" is set to a "1" for Outbound.

From the Response, we receive the Campaign ID in the "campaign" array under the "id" element. This id is to be used for the append operation. The following is the code snippet.

Anchor
arc arc

3. Append Records to a Campaign

After you generate the Campaign ID, you must append records to the campaign. Along with the LV-Session token, the Campaign ID must be included as a URL parameter in the HTTP PUT request along with a simple record containing a phone number. Only the "phone1" element is required by the Append Record to Campaign API, but additional information such as account number, names, email, etc. can be submitted.

You can enter additional phone numbers using the phone2 field. This should be entered as an array of phone numbers. This field can be filled with up to 30 additional phone numbers separated by a comma. In this example, two additional phone numbers are added to the appended record. The following is the code snippet.

After submitting the append request, a status code of 204 should be returned indicating the record has been successfully added to the campaign.

Anchor
var var

4. View Appended Records

To view your appended records on the selected campaign, navigate to the Campaign details screen and select the Campaign Records tab. You can view a new record, including newly added phone numbers on the Phone 2 column.